Fill Dirt in Ardmore, OK

Fill-dirt is subsoil material with few organic materials, used to raise low spots, build pads, or backfill around foundations. In Ardmore's red clay region, it is commonly used to level yards, fill shallow depressions, and prepare a base before adding topsoil or gravel. It is not a substitute for topsoil where you plan to grow grass or gardens.

Prices vary by supplier and moisture content, but expect fill-dirt in the Ardmore area to typically run about $10 to $25 per ton delivered. Hello Gravel has a 3-ton minimum order; final price depends on exact location, vehicle access, and any spreading or next-day delivery fees. Use our checkout or request a quote for an exact delivered price to your address.

Standard delivery takes 2+ business days and is often included or low-cost within local zones, while next-day delivery has an extra fee if ordered before noon CST. Tailgate spreading may be available at checkout and performed at the driver's discretion; if you need professional spreading or compaction, expect additional contractor fees. Hello Gravel will list any delivery fees and spreading requests during checkout.

Fill-dirt in this area typically weighs about 1.2 tons per cubic yard (varies with moisture and compaction). Rule of thumb: 1,000 sq ft covered 1 inch deep requires roughly 3.7 tons. Example estimates: 12x40 driveway (480 sq ft) per inch ≈ 1.8 tons; 10x10 pad (100 sq ft) per inch ≈ 0.37 tons.

For Ardmore's clay-rich soils, a well-graded native fill-dirt or screened subsoil that compacts well is usually best for raising grade or backfill. Avoid organic-rich topsoil as fill because it shrinks and settles; if drainage is a concern, consider mixing in coarser material or installing a drainage layer. Always compact in lifts to reduce future settling given the local clay behavior.

In hot, dry summers fill-dirt can shrink and crack if not compacted and hydrated properly; during heavy rains, loose or poorly graded fill can erode or wash away on slopes. Proper placement in thin lifts with compaction, grading for positive drainage, and erosion controls (silt fence, temporary cover) help prevent problems common to the region. If you are changing site drainage, check local rules before placing large amounts of fill.

For driveways in Ardmore, crusher run (crushed stone with fines) is typically better because it compacts to a stable surface and sheds water. Fill-dirt is appropriate for raising grade, structural backfill, and areas that will later receive a proper base and driveway material. Clean fill (sandy, low fines) is useful where drainage is needed; choose based on the final use and drainage needs.

Most fill-dirt will settle over the first 6 to 12 months, especially if placed without compaction or on organic soils; plan on topping up and light regrading after major rain events. Once compacted properly and vegetated or covered, maintenance is low, though slopes and unprotected fills may require periodic regrading after storms. For critical areas like foundations or driveways, professional compaction can reduce future maintenance.

Small, routine residential fills are often allowed, but large-scale fills or work that changes drainage, affects wetlands, or alters neighboring properties commonly require permits. If you plan to move 50+ cubic yards, change site grades significantly, or alter stormwater flow, contact the City of Ardmore Planning/Building Department or Carter County for specific permit requirements. Hello Gravel recommends checking local regulations before ordering large volumes.

Yes. Hello Gravel connects you with local suppliers and contracted haulers in the Ardmore area and will show delivery options and minimums during checkout. For professional spreading and compaction services, we can recommend local contractors or you can request spreading during checkout (subject to driver discretion); we advise getting quotes from contractors for mechanical compaction and finish grading.

Proper installation includes placing fill in thin lifts (4 to 6 inches), compacting each lift, grading for positive drainage away from structures, and protecting exposed fill from erosion with straw, seed, or erosion control fabric. On slopes, add terracing or geotextile where needed, and avoid leaving loose fills before heavy rain events common in the region.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.