Fill Dirt in Zachary, LA

Delivered prices in the Zachary area usually fall in the range of about $10 to $30 per ton for basic fill-dirt, depending on supplier, distance, and truckload size. Additional fees can apply for next-day delivery, long-drive charges, or difficult drop locations. Hello Gravel requires a 3-ton minimum and recommends checking your zip code for exact, upfront pricing and availability.

A good rule of thumb is about 0.35 tons of fill-dirt per inch per 100 square feet (roughly 0.03 tons per square foot per inch). For example, a 1,000 sq ft area needs about 3.5 tons for every inch of depth. Always add 10-30% extra to allow for compaction and settlement, and use our material calculator or contact Hello Gravel for a project-specific estimate.

Zachary’s clay-rich soils and humid summers increase the chance of poor drainage, slow infiltration, and seasonal swelling or slumping where fill is placed. That means fill-dirt can hold water, settle unevenly, or become soft after heavy rain, so good grading and drainage are essential. Consider using structural fill or adding coarse material under load-bearing areas and avoid placing organic-rich fill in spots that need long-term stability.

Deliveries are made by contracted dump trucks (often tri-axle); expect trucks roughly 25-30 ft long and 8.5 ft wide that need a stable access path to the drop location. Hello Gravel’s minimum order is 3 tons, standard delivery is 2+ business days, and next-day delivery is available for orders placed before noon CST for a fee. You can request tailgate spreading at checkout, but drivers will decide on arrival whether it can be done safely.

Permit and drainage requirements vary by lot and local regulation, so check with the City of Zachary building/permits office or your parish planning department before moving large amounts of fill. If you are changing grades near property lines, town right-of-way, or wetlands, you may need approvals or engineered drainage plans. When in doubt, contact the local permitting office or a licensed contractor for guidance.

Fill-dirt is the least expensive option for raising grade or filling low spots but is not a durable wearing surface for driveways in Zachary’s wet climate. Crushed stone or limestone compacts well and holds up much better as a finished driveway surface, while shell can be a regional option but may track and displace. For a long-lasting driveway, contractors typically use a compacted stone base with a suitable wearing layer rather than plain fill-dirt.

Contractors place fill in lifts (typically 4 to 8 inches loose) and compact each lift with plate compactors or vibratory rollers until the required density is reached. They control moisture during compaction—too wet or too dry soil won’t compact properly—and often test density with a contractor or engineer if the area will carry heavy loads. For weak native soils, contractors may add structural fill, geotextile fabric, or a crushed stone subbase before placing fill-dirt.

Yes. Hello Gravel connects customers with local suppliers and haulers and can often recommend contractors or partner landscapers who provide compaction and grading services. When you request a quote, tell us you need compaction or grading so we can flag that for suppliers; you can also call 855-241-8884 or text 844-407-3734 for project help. If Hello Gravel doesn’t directly provide the service, we’ll point you to likely local options.

Most settlement happens in the first 6 to 12 months, with noticeable settling after heavy rains, but minor settling can continue for a year or more. Expect to need top-up loads and regrading after initial settlement, and inspect slopes and low spots after storm seasons. To minimize maintenance, compact in lifts during installation, provide positive drainage, and plan for a final wearing surface where traffic is expected.

Specify the purpose (grade change, base material, backfill) so suppliers can match the right material and advise on compaction needs; note any access restrictions or preferred drop spots in Order Notes. Order 10-30% extra for compaction and settlement, request delivery times that avoid heavy rain if possible, and add a request for tailgate spreading at checkout while understanding it is at the driver’s discretion.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.