Fill Dirt in Deville, LA

Fill-dirt is unprocessed subsoil used to raise low areas, build pads, or fill holes; it often contains fines and clay and is not intended as a finished driveway surface. In Deville's yards and building sites, use fill-dirt for bulk grade changes, berms, or under a structural base, then cap it with compactible base material if you want a stable, finished surface.

Prices vary by supplier and exact material, but in West Louisiana delivered fill-dirt in Deville commonly ranges roughly $12 to $25 per ton. A typical tri-axle truck (about 10–15 cubic yards, roughly 12–20 tons depending on moisture) will often cost between about $150 and $400 delivered; get a zip-code quote on Hello Gravel for an exact local price.

Deville and Rapides Parish are served by regional sand and gravel pits and landscaping suppliers based in and around Alexandria; Hello Gravel will connect you to the specific local vendors serving your zip code. Minimum orders often follow Hello Gravel's 3-ton platform minimum, but many local quarries and yards prefer 10-yard or full-truck minimums; delivery fees depend on distance, access, and required truck type, so request a quote for accurate fees.

In clayey sites common around Deville, fill-dirt can hold moisture, settle, and become soft after heavy rains unless compacted and drained properly. Expect slower drainage and possible seasonal softening; mitigate this with good compaction, drainage planning, and avoiding placing fine, wet fill during prolonged wet periods.

Calculate volume (sq ft x depth in feet) then convert to cubic yards (divide by 27) and multiply by soil weight (use 1.2–1.4 tons per cubic yard for typical fill-dirt). Example: a 12' x 100' driveway at 4u0022 = 1,200 sq ft x 0.333 ft = 400 cu ft = 14.8 cu yd, which is about 18–21 tons; add 10–20% extra for compaction and settlement for all estimates.

Permitting rules vary by project and lot: small grading and yard fill may not require a permit, but larger changes, fills in floodplains, work near wetlands, or changes affecting stormwater may trigger Rapides Parish or state permits. Check with the Rapides Parish Planning Department or parish police jury and your neighborhood covenants before ordering, and consider contacting Hello Gravel's team for guidance on local requirements.

Place fill-dirt in thin lifts (typically 4–6 inches) and compact each lift with a plate compactor for small areas or a vibratory roller for larger pads until the soil reaches good stiffness. Use geotextile fabric over very soft ground, plan drainage to direct water away, and avoid placing fill when soils are too wet; final surfaces should be capped with proper base material for driveways or turf soil for landscaping.

Fill-dirt is inexpensive but not ideal as a finished driveway surface because it compresses and can rut in Deville's wet climate; it can work as bulk fill under a properly engineered base. Crushed limestone or compactible bank-run gravel are better for driveway bases and surfaces for durability and drainage, while sand generally performs poorly as a structural layer in our region.

Some West Louisiana suppliers offer screened or filtered fill-dirt that has fewer large clods and less organic material; screened material is cleaner and typically costs more. Higher-quality, screened fill-dirt compacts more uniformly and reduces future settling and organic decomposition issues, so it is worth considering for landscaping near homes or under structures—ask for a sample or photo when ordering through Hello Gravel.