Fill Dirt in Terry Town, LA

Local prices for fill-dirt in the Terry Town / West Louisiana area typically fall in the range of about $10 to $25 per ton, depending on supplier, moisture and clay content, and delivery distance. That equates roughly to $12 to $30 per cubic yard using a common conversion; exact pricing is shown at checkout and varies by supplier and trucking availability.

Hello Gravel's minimum order is 3 tons, which applies in Terry Town as well. Delivery fees vary by supplier and site access: many orders in the region have free or low-cost delivery, while difficult access or long hauls can add $25 to $150; next-day delivery is possible for orders placed before noon CST for an extra fee.

Terry Town's humid subtropical climate and local clay-rich soils tend to hold moisture and can restrict drainage, so pure fill-dirt with high clay content may settle, remain wet, and become soft after heavy rains. For critical uses (driveway subgrade, building pads, or raising grades) you should compact in lifts and consider mixing or topping with a more granular material for better drainage and stability.

For raising yards or non-structural areas, place fill-dirt in 4 to 8 inch lifts and compact each lift with a plate or roller to reduce settlement; aim for as high a density as practical, commonly targeting 90-95% Standard Proctor where required by project specs. For driveway subgrades use fill-dirt only as underlying structural fill (not the driving surface): compacted fill of 4-6 inches under a 4-6 inch crushed stone base is a common approach. Expect to account for 10-20% settlement and order extra material accordingly.

Fill-dirt alone often does not improve drainage if it is clayey, because clay slows water movement and can trap moisture; using it to raise grades can help if you also install positive slopes, swales, or subsurface drains. For drainage improvement in Terry Town, combine clean or sandy fill, proper grading (1-2% slope away from structures), and drainage features like French drains or perforated pipe rather than relying solely on fine fill-dirt.

Fill-dirt is an economical choice for raising grade and backfill but tends to be finer and less stable than crushed stone or bankrun for driveway surfaces. Crushed limestone is better for long-term driveway durability and drainage; bankrun (mixed stone and fines) is a cheaper, all-purpose base; clean fill or engineered sand is preferred where drainage or contamination testing is a concern. Choose fill-dirt for bulk elevation work and use a granular cap (crushed stone) where traffic or drainage performance matters.

Many local contractors offer full-service options including hauling, spreading, compaction, and grading, but services vary by contractor and job size; Hello Gravel handles material sourcing and delivery while many customers hire local crews for compaction and finish grading. Always confirm scope, equipment (roller, plate compactor, skid steer), and whether the contractor will compact in lifts to avoid surprises.

Properly compacted fill-dirt used as subsurface material can perform well for years, but surface areas of loose fill-dirt are prone to erosion, settling, and rutting after heavy rain and may need touch-up grading annually. For driveways or areas with traffic, topping with crushed stone and periodic regrading will extend life; expect routine maintenance after major storm seasons in West Louisiana.

Yes. Raising lot elevation can affect drainage patterns and flood elevations; check local city/parish building and zoning offices, your HOA rules, and FEMA flood maps before adding significant fill. If your lot is in a floodplain or you are changing finished grade near property lines, you may need a permit or engineered plans.

Use this rule-of-thumb: cubic yards = (area in sq ft * depth in inches) / 324. Then convert to tons by multiplying cubic yards by a local density factor (a common estimate is 1.1 to 1.3 tons per cubic yard for fill-dirt); for example, 1,000 sq ft at 6 inches needs about 18.5 cubic yards, which is roughly 20 to 24 tons. Always order 10-20% extra for compaction and settlement and ask your supplier for their specific tons-per-cubic-yard figure.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.