Fill Dirt in Wrens, GA

Fill dirt is mostly subsoil with little organic matter used to raise grade, backfill foundations, or fill low spots. In Wrens it is commonly used for yard grading, site leveling before sod or driveways, and below-grade backfill where good drainage and structural support are needed—not for planting beds or final landscaping surfaces.

Wrens sits in a region with clay-prone soils and frequent heavy rain, which can hold water and cause swelling or slow drainage. That means properly compacting fill dirt, controlling surface and subsurface drainage, and avoiding high-organic topsoil as structural fill are critical to reduce future settlement and moisture-related movement.

Common projects include grading low spots, raising lawn areas, foundation backfill, and creating a base under driveways before base rock is added. As a rule of thumb, 1 cubic yard of fill dirt is about 1.2 to 1.5 tons depending on moisture; to raise 500 sq ft by 6 inches you need roughly 9.3 cubic yards (about 11 to 14 tons).

Contractors typically recommend adding 5% to 15% extra material to account for compaction, settling, and minor measurement errors. For most small residential jobs in Wrens we suggest ordering about 10% extra to be safe, and round up to the next half- or full-truck load if you need delivery convenience.

Most deliveries to Wrens are done with tri-axle dump trucks or end-dumps that need about 12 to 14 feet of vertical clearance and a 12- to 20-foot turning radius. Make sure driveways and access are stable (no soft shoulders), note low branches and power lines, and add special access instructions at checkout; Hello Gravel’s minimum order is 3 tons and drivers will assess safe offload location on arrival.

Small residential fills often don’t need a permit, but larger fills, changes to drainage, or work in a right-of-way can trigger county or city permits and stormwater rules. Contact Jefferson County Building and Planning or the City of Wrens before big deliveries to confirm erosion-control, driveway culvert, or grading permit requirements.

When placed in controlled lifts, compacted properly, and paired with good drainage, fill dirt can perform well for many years in West Georgia’s climate. However, clay-rich soils and heavy rains can cause some settlement over time, so expect minor settling in the first year and plan for regrading or topping as needed.

For structural fills, driveways, and larger grading jobs we recommend renting compaction equipment or hiring a local contractor; common machines include plate compactors for small areas, vibratory rollers for larger areas, and skid steers for spreading. Local contractors and equipment rental shops in the Wrens/West Georgia area can quote rates—get multiple estimates and confirm they compact in lifts rather than trying to compact a single deep layer.

Fill dirt is intended as bulk structural fill or to build grade but has poor drainage and is not a suitable surface material for driveways. Crusher run or crushed stone provides a stable, draining base for driveways and is the preferred material for vehicular surfaces, while topsoil is for planting and should be kept off structural fill where vegetation or organic matter would cause settling.

Order online and enter your Wrens zip code to get local supplier options; Hello Gravel’s minimum order is 3 tons, standard delivery is 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee. You can request tailgate spreading at checkout, but drivers perform spreading only at their discretion for safety and access reasons.

Hello Gravel works with regional suppliers around West Georgia, and specific quarry availability varies by load date and location. Minimums depend on the supplier and the truck type, but Hello Gravel requires a 3-ton minimum order and many local suppliers prefer full truckloads for best pricing—contact our sales team at 855-241-8884 or text 844-407-3734 for exact local options and minimums.

Best practice is to place fill dirt in lifts (commonly 6 to 8 inches loose) and compact each lift to a firm, dense condition; for structural or engineered fills contractors often target 90% to 95% of standard Proctor density. For homeowner projects, insist that contractors compact in lifts and demonstrate stable results rather than trying to compact one thick layer.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.