Fill Dirt in Forsyth, GA

Prices vary by supplier and haul distance, but in Forsyth fill dirt typically runs between $12 and $30 per ton delivered. Final cost depends on quantity ordered (minimum 3 tons with Hello Gravel), local availability, and whether the material is screened or contains significant clay or rocks.

Across Georgia fill dirt prices are similar, and Forsyth usually falls in the state range. Expect roughly $12 to $30 per ton in Forsyth, with rural or long-haul deliveries at the higher end and local, unscreened material at the lower end.

A typical tri-axle dump truck load in the Forsyth area holds about 10 to 14 tons of fill dirt; delivered cost for a full load generally ranges from about $150 to $420 depending on per-ton price and delivery fees. Hello Gravel shows exact costs and delivery options at checkout and can quote based on your zip code and required tonnage.

Yes, fill dirt is usually cheaper than crushed gravel because it requires less processing. However, the two materials serve different purposes: fill dirt is for building up soil and grading, while gravel is used for drainage and driveways, so choose by function as well as price.

Local tri-axle dump trucks commonly carry about 10 to 14 tons of fill dirt in Forsyth. Larger end-dump or quad-axle trucks can carry more (18 to 25 tons), but availability depends on the local hauler and site access.

Coverage depends on the depth you need. As a rule of thumb in Forsyth, 1 ton of fill dirt covers roughly 130 sq ft at 2 inches deep, about 65 sq ft at 4 inches, and about 44 sq ft at 6 inches—adjust for compaction and moisture.

One cubic yard is 27 cubic feet and will cover about 162 sq ft at 2 inches depth in Forsyth. For deeper fills, expect about 81 sq ft at 4 inches and about 54 sq ft at 6 inches; convert to tons by using roughly 1.2 tons per cubic yard for local estimates.

Shale fill dirt is soil mixed with broken shale rock fragments; it can be harder and may shed small rock pieces. In the Forsyth area you may see clay-rich soils and occasional shale depending on the borrow site; shale-heavy material is usually cheaper but less desirable for planting or final grading.

The most cost-effective options are ordering unscreened local fill from nearby suppliers, arranging a pickup if you have a truck, or using excavated on-site soil when appropriate. Check Hello Gravel for local supplier rates, compare delivered prices, and order the minimum required only after calculating need—remember our minimum order is 3 tons.

Measure the length, width, and desired depth in feet, multiply to get cubic feet, then divide by 27 to get cubic yards. Convert to tons using about 1.2 tons per cubic yard for Forsyth soils and add 10% to 15% for settlement and compaction before ordering.

Drivers may be able to perform tailgate spreading at their discretion, but it is not guaranteed. Request spreading at checkout and note that the driver will assess site access and safety upon arrival before agreeing to spread material.