Fill Dirt in Pine Mountain, GA

In Pine Mountain and West Georgia, fill dirt typically ranges from about $10 to $30 per ton (roughly $12 to $36 per cubic yard) depending on local supply, truck size, and delivery distance. Hello Gravel requires a 3-ton minimum and may charge extra for next-day delivery or for sites that need special access. For an accurate price and delivery window for your address (Pine Mountain, pop. 5,340), get a quote on our site or call our team.

Yes, fill dirt is generally cheaper than decorative or crushed gravel because it includes fewer processed materials and more native soil. Fill dirt is best for bulk grading and backfill, while gravel is designed for drainage and driveways; choose based on the job, not just price. If you need a driveway surface in Pine Mountain's clay soils, plan to use base rock or crushed stone over fill dirt.

One ton of typical fill dirt is roughly 0.8 cubic yards, and one cubic yard equals 27 cubic feet. Coverage depends on depth: one ton will cover about 130 sq ft at 2 inches, about 43 sq ft at 6 inches, and about 22 sq ft at 12 inches. For Pine Mountain yards with clay subsoil, allow extra material for compaction and settling.

A typical tri-axle dump truck in our service area carries roughly 10–12 cubic yards (about 12–18 tons for fill dirt), and local delivered cost can vary widely based on truck size, distance, and site access. In West Georgia you might see single-truck deliveries priced anywhere from a few hundred to over a thousand dollars; get a Hello Gravel quote for a precise figure. Remember our minimum order is 3 tons and delivery timing (standard 2+ business days) can affect price.

A full-size pickup bed can sometimes hold a partial cubic yard, but a full cubic yard of fill dirt (27 cubic feet, roughly 1.2 tons) often exceeds a truck's safe payload. Check your truck’s payload rating before hauling dirt; many homeowners use a rented trailer or order truck delivery. Hello Gravel delivers by dump truck, which avoids overloading personal vehicles and handles the heavy loads safely.

Capacity depends on the truck and local weight limits, but a common tri-axle dump truck in West Georgia will carry about 10–12 cubic yards or roughly 12–18 tons of fill dirt. Smaller single-axle trucks carry less volume and weight. If you need a specific truck size for Pine Mountain, request that option at checkout or ask our sales team for recommendations.

Yes, fill dirt is commonly used to raise low spots and do bulk grading, but plan to place it in thin lifts (4–6 inches) and compact each layer to avoid future settling. In Pine Mountain’s clay-prone soils, consider drainage and slope toward outlets—fill dirt alone is not good topsoil for planting grass or gardens. After grading, add 4–6 inches of topsoil where you plan to plant lawns or gardens for healthy growth.

One cubic yard is a stack about 3 ft x 3 ft x 3 ft (27 cubic feet); one ton of fill dirt is roughly 0.8 cubic yards and may look slightly smaller. A tri-axle truckload of 10–12 cubic yards will appear as a long, low pile in your driveway or yard. If you’re unsure how much you need for a Pine Mountain project, use Hello Gravel’s material calculator or contact our team with your area and desired depth.

No—fill dirt is not recommended as the finished surface for driveways. It compacts but does not provide the drainage or load-bearing surface needed for vehicles; base rock or crushed stone is the appropriate layer to drive on. Use fill dirt for subgrade or to raise and level areas, then top with compactable base material for driveways in West Georgia’s sometimes clay-heavy soils.

Two inches of fill dirt is usually only suitable for light surface adjustments and is not enough for structural fills or grading. For leveling, drainage correction, or creating a base for turf, plan on several inches to a foot or more depending on the problem—always compact in layers. For driveways, patios, or heavy loads, specify greater depths and suitable base materials rather than relying on a 2-inch fill dirt layer.

Yes, homeowners can install fill dirt for small projects if they have access to the right tools (shovel, rake, plate compactor or rented roller) and understand compaction, drainage, and safety. For larger loads or tight access, a dump truck delivery and professional compaction is usually easier and safer. If you’re unsure, contact Hello Gravel for advice, use our calculators, or hire a local contractor familiar with Pine Mountain soils.

Measure the area in square feet and decide the desired depth in inches, then use: cubic yards = (area x depth in inches) / 324. Add 10–30% extra for compaction and settling, then convert to tons using roughly 1.2 tons per cubic yard for fill dirt. If you prefer, use Hello Gravel’s material calculator and enter your Pine Mountain address for a tailored estimate.

Fill dirt varies by local geology and in West Georgia you may see clay, sand, or mixed textures; color and texture differences are normal. If you have concerns about quality or suitability for your Pine Mountain project, contact Hello Gravel customer service promptly so we can address the issue and follow our resolution process. Keep in mind tailgate spreading is at the driver’s discretion, and material photos are representative, not guaranteed exact matches.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.