Fill Dirt in Lumber City, GA

Delivered fill dirt prices in West Georgia typically fall in a broad range because costs depend on supplier, haul distance, screening, and season. Expect a rough ballpark of about $10 to $35 per ton (roughly $8 to $28 per cubic yard) for basic unscreened fill dirt, with screened or engineered mixes costing more. For an exact quote for Lumber City, enter your zip code at checkout or contact our team to compare local supplier pricing.

To raise 1,000 sq ft by 1 inch you need about 3.1 cubic yards of material (1,000 sq ft × 1/12 ft = 83.3 cu ft; 83.3 ÷ 27 = 3.1 cu yd). Fill dirt density varies, but that equals roughly 3 to 4 tons depending on moisture and compaction. Order a small buffer to allow for settlement and compaction, and use our material calculator at checkout to get a customized quantity.

On Lumber City's clay soils and wet summers, choose clean fill dirt with low organic content and good gradation; avoid loose, high-organic soils that shrink and settle. For areas needing drainage or vehicle use, contractors often blend fill dirt with coarse sand or a layer of crushed stone to improve drainage and stability. Ask suppliers for screened, low-organic fill or consider an engineered mix if you expect repeated wet conditions or heavy loads.

Many local suppliers in West Georgia offer both screened and unscreened fill dirt; screened material is sifted to remove roots and large clods so it compacts more uniformly. Screened fill typically costs more, often $3 to $12 per ton above unscreened material depending on the supplier and distance. If you need a clean, compactible base for grading or construction, screened fill is usually worth the extra cost.

Yes, weather affects deliveries in Lumber City. Heavy rain and spring mud can cause access issues that lead to rescheduling or additional site-fee charges, and extreme heat or high demand in summer can sometimes bring surcharges. We recommend scheduling deliveries at least two business days out and contacting our team if you have time-sensitive needs or tricky site conditions.

Common access constraints include narrow driveways, low-hanging power lines, soft shoulders or culverts, gated properties, and tight turns that block tri-axle dump trucks. Drivers may ask to place material at the most accessible point and will not drive over surfaces that are unsafe. Mark driveways, obstacles, and utility lines before delivery and add specific site notes at checkout to help haulers plan.

Contractors in West Georgia typically place fill dirt in 4- to 6-inch lifts and compact each lift with a plate compactor for small areas or a vibratory roller for larger sections. They commonly target about 90% to 95% of Standard Proctor density, depending on project requirements and local soils. For driveway bases, many crews finish with a stabilizing layer such as crushed stone after compaction to improve drainage and load-bearing capacity.

Fill dirt is a cost-effective choice for general grading and non-planting backfill because it compacts well and has low organic content, but it does not drain as well as crushed stone and is not suitable for landscaping that needs good topsoil. Crushed stone is better for drainage, structural backfill, and driveways, while topsoil is required for planting and lawns. Choose material based on function: fill dirt for bulk grading, crushed stone for structural bases, and topsoil for planting.

Permitting rules vary by project scope and local jurisdiction, and small residential deliveries usually do not require permits. However, large fills, changes to drainage, work in floodplains, or projects affecting stormwater may trigger county or city permits and inspections. Check with Lumber City city hall or the county planning office before major grading, and consult a local contractor if you are unsure.

Yes, many Lumber City-area landscaping and grading contractors offer bundled pricing that includes material supply, delivery, and installation. Hello Gravel can connect you with local suppliers and many suppliers can recommend installers or contractors who handle grading and compaction. Ask for firm quotes that separate material, hauling, and labor so you can compare options and confirm timelines.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.