Fill Dirt in Lithonia, GA

Delivered fill dirt prices in Lithonia vary by supplier, truck distance, and whether the material is screened or includes rock. Typical delivered ranges are roughly $15 to $50 per ton, but regional factors (Clay-rich Piedmont soils, haul distance) can push prices up or down. For a precise price, enter your zip code on Hello Gravel or request a local quote.

Coverage depends on how thick you spread it. One ton of typical fill dirt is about 0.75 to 0.85 cubic yards, which covers roughly 250 sq ft at 1-inch depth, 125 sq ft at 2-inch depth, and about 42 sq ft at 6-inch depth. Adjust for compaction and the uneven ground on your site.

Most tri-axle dump trucks used in our network carry about 10 to 16 tons of loose fill dirt (roughly 8 to 12 cubic yards), depending on local loading and moisture. Truckload cost in Lithonia will vary with material and haul distance; expect to pay several hundred dollars for a single tri-axle load, and always check Hello Gravel for an exact delivered price.

Yes, basic fill dirt is generally cheaper than crushed gravel because it is simpler material (more fines, fewer processing steps). Fill dirt is cost-effective for raising grade or backfill, while gravel is pricier but better for drainage and driveways. Choose based on function: use fill dirt for volume and grading, gravel where drainage and surface strength matter.

Buy locally sourced material, order the minimum practical number of tons to reduce per-ton haul costs (Hello Gravel minimum is 3 tons), and avoid specialty screened or blended mixes. If you have pickup capability, self-haul can save money, but for most homeowners using Hello Gravel, scheduling a standard delivery and comparing quotes from local suppliers is the easiest low-cost option.

For rough grade fills and bulk volume, raw fill dirt is usually fine and less expensive; screened fill dirt is better when you need a cleaner finish, better compaction, or are filling near lawns and planting beds. In Lithonia’s clay-prone areas, screened material can help with uniform compaction and avoid large clods—ask for screening preferences in Order Notes at checkout.

Yes, fill dirt is commonly used for backfill and raising grade, but Lithonia’s local red clay can hold moisture and shrink or swell more than sandy soils. Plan for proper compaction in lifts, consider drainage, and consult a contractor for structural fills near foundations. Hello Gravel suppliers can advise on compaction recommendations and local soil behavior.

Measure the area (length x width) and decide the target depth, then calculate cubic yards: (length x width x depth in feet) / 27. Convert cubic yards to tons using roughly 0.75 to 0.85 cubic yards per ton for fill dirt, then round up to allow for compaction and settlement. Use Hello Gravel’s material calculator or contact our team for help with your specific site conditions.

Hello Gravel coordinates delivery via local dump truck fleets and can request tailgate spreading at checkout, but spreading is performed at the driver’s discretion and is not guaranteed. Standard delivery lead time is 2+ business days; next-day delivery is available for orders placed before noon CST with an additional fee. Include spreading requests in Order Notes and our team will pass them to the driver, who will assess safety on arrival.

Contact Hello Gravel as soon as possible—changes are easier before an order is processed or dispatched. We will do our best to accommodate modifications, but ability to change or cancel depends on processing status and supplier acceptance. For specific refund and cancellation details, see our order and refund policies or contact customer service.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.