Fill Dirt in Fairburn, GA

Prices vary by supplier, moisture content, and delivery distance, but in Fairburn you can typically expect delivered fill dirt to fall roughly in the range of $10 to $30 per ton. Hello Gravel shows exact pricing for your ZIP code at checkout, with a 3-ton minimum order and standard delivery in 2+ business days; next-day delivery is sometimes available for an extra fee.

Use the formula: cubic yards = (area in sq ft x depth in feet) / 27. As a rule of thumb, 1 inch of fill over 1,000 sq ft is about 3.1 cubic yards; a typical 6-inch raise over 1,000 sq ft needs about 18.5 cubic yards (roughly 20–25 tons depending on local density). Always add 5–10% extra for compaction and waste.

Yes. Fairburn’s clay subsoils and the humid Georgia climate increase the risk of poor drainage, shrink-swell behavior, and longer settling times. For reliable results, place fill in thin lifts (4–6 inches), compact each lift with proper equipment, and manage surface drainage to reduce future settling and soft spots.

For yard fill and grading, use clean fill dirt with few organics and a mix of fines for easy compaction. For a driveway base, straight fill dirt is not ideal: use a well-graded granular base (crusher run or aggregate base course) that contains coarse particles and fines for interlock and drainage, then cap with a wearing layer like gravel or pavement.

Requirements can vary by project and permit type, so check with the City of Fairburn building and permitting office before starting work. Many residential contractors follow common industry standards (often 90–95% of Standard Proctor) for load-bearing areas; if a permit or inspection is required, the city will specify acceptable compaction testing and documentation.

If used alone, fill dirt rarely makes a durable driveway base and will typically show rutting and settlement within a few seasons under vehicle traffic. Properly installed fill used for subgrade under a compacted, granular base and good drainage can remain stable for many years; for long-term driveways choose a granular base (crusher run or ABC) over plain fill dirt.

Fill dirt is primarily soil and fines meant for raising grade and backfill; it compacts but retains little structural strength or drainage. Crusher run is crushed stone mixed with fines that locks together to form a stable, draining base ideal for driveways. For driveways in Fairburn’s climate and clay subsoils, crusher run or aggregate base is the preferred material for the structural base.

Hello Gravel connects you with local suppliers and contracted dump trucks for delivery; minimum orders start at 3 tons and standard delivery is usually 2+ business days. Some local suppliers or drivers offer tailgate spreading at their discretion—request it at checkout—but fees for machine spreading or more extensive spreading typically run from roughly $75 to $250 depending on volume and site access. Spreading is not guaranteed and depends on safety and equipment availability.

Yes, in many Fairburn situations a geotextile fabric is a low-cost way to separate fill or base material from native clay, reduce mixing, and improve stability and drainage. Use a woven or nonwoven fabric appropriate for separation under base and install it over a prepared subgrade before placing fill or aggregate; this is especially helpful on wet or soft sites.

Costs vary by access, depth, and whether you need a granular base. For a 1,000 sq ft area raised 6 inches with fill dirt and basic compaction, expect materials plus labor commonly to run in the low thousands of dollars; if you install a proper driveway base with crusher run, compaction, and grading, total cost often ranges from about $1,500 to $4,000 depending on site conditions and contractor rates. Get local quotes and confirm whether the price includes hauling, compaction, grading, and any permit work.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.