Fill Dirt in eden, GA

Fill dirt is clean subsoil used to raise grade, backfill foundations, or fill low spots. In Eden’s yards it’s common for raising building pads, filling ruts, and grading toward drainage outlets; it is not intended as a finished surface for driveways or landscaping without a top layer like topsoil or crushed stone.

In West Georgia, loose fill dirt typically ranges from about $8 to $20 per ton depending on source and quality, with delivery fees commonly between $50 and $200 based on distance and truck size. Exact pricing varies by supplier and season, so check your zip code on Hello Gravel for firm quotes and available delivery dates.

Measure the area (length x width) and the depth you want to fill in feet, then multiply to get cubic feet and divide by 27 to convert to cubic yards. For Eden’s local soils, plan on 1 cubic yard equaling about 1.2 to 1.6 tons depending on moisture and compaction; use Hello Gravel’s calculator or contact our team for a quick estimate based on your project dimensions.

Yes, regional suppliers and haulers in West Georgia serve Eden, and many offer delivery by tri-axle dump truck. Spreading is sometimes offered at driver discretion; request tailgate spreading at checkout but expect the driver to assess safety and feasibility on arrival.

Fill dirt compacts well and is often used to raise grades in clay-heavy Eden yards, but because clay retains water it can stay wet and settle; for areas with heavy rainfall or where drainage is critical, combine fill dirt with proper drainage (e.g., swales, pipe) or use a granular base (crushed stone) under driveways. For final surfaces or where frost heave and drainage are concerns, contractors typically prefer engineered fill or stone bases over fill dirt alone.

Contractors usually place fill dirt in 4- to 6-inch lifts and compact each lift with a plate compactor or roller until firm; target relative compaction is often 90% to 95% of the standard proctor for structural work. For building pads or where code applies, follow the project’s geotechnical recommendations and get compaction testing if required by your county.

If left as the surface under vehicular traffic, fill dirt will tend to rut and settle and may need replenishment or regrading within 1 to 3 years depending on traffic and drainage. When used as sub-base with proper compaction and a stone or crusher-run driving surface, it can last many years with routine maintenance.

Permit requirements vary by county and project size; small residential deliveries usually need no permit, but land-disturbing activity (often over 1 acre) or significant grading may trigger local building or erosion control permits. Check with Eden’s city hall or your county planning and building department before ordering large volumes, and ask Hello Gravel for paperwork guidance if you’re unsure.

Fill dirt is best for raising grade and backfill but is not an ideal wearing surface for driveways; crushed stone or crusher run makes a more durable, well-draining driveway surface. Bank sand is good for bedding and leveling but does not compact like fill dirt; for erosion control on slopes, combine fill dirt for bulk shaping with stone, geotextile, and vegetation for surface protection.

Stabilize newly placed fill dirt quickly by using temporary erosion controls (silt fence, straw mulch, or erosion blankets), install permanent drainage features like swales or rock-lined channels, and cap exposed fill with topsoil and grass, shrubs, or groundcover. For steeper slopes consider terracing, retaining walls, or geotextile reinforcement to limit washout during West Georgia’s heavy summer storms.

Yes. Summer and spring are high-demand seasons for yard and grading work, which can tighten availability and increase delivery times, while heavy rain or saturated ground can delay deliveries and spreading. Schedule deliveries at least a few days ahead, choose a dry-weather date if possible, and use Hello Gravel’s calendar to see available windows and next-day options when offered.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.