Gravel in Southwest Ranches, FL

Material prices for gravel in Southwest Ranches vary by type, but expect roughly $25 to $80 per ton depending on whether you choose shell, crushed limestone, pea gravel, or specialty decorative stone. Hello Gravel has a 3-ton minimum order and delivery fees depend on local supplier and driveway access; many customers see free delivery but smaller orders or difficult access can add $50 to $150. Request a zip-code quote for accurate pricing and available next-day options.

For Southwest Ranches, crushed limestone or crushed shell are common because they lock together well and drain better than loose pea gravel in wet conditions. Pea gravel is attractive for low-traffic landscaping but can migrate and float in heavy rain, so it is less ideal for primary driveways unless contained and stabilized. Consider adding a compacted base or grid stabilization for driveways to improve load-bearing and reduce washouts.

Estimate using 1.4 tons per cubic yard: a 12x40 driveway (480 sq ft) needs about 6-9 tons at 3-4 inch top depth and 8-12+ tons if you include a 4-6 inch compacted base. A 20x40 driveway (800 sq ft) typically requires about 10-14 tons at 3-4 inches, or 14-20+ tons including a base layer. For Florida, we recommend a compacted base of 4-6 inches under a 2-4 inch surface course for durability and drainage.

Yes — Hello Gravel connects you to trusted local suppliers and contracted haulers serving Southwest Ranches and the wider West Florida region. Availability of spreading services varies by supplier and driver; you can request tailgate spreading at checkout but it is performed at the driver's discretion and not guaranteed. For full spreading and compaction services, Hello Gravel can help you find local contractors who provide installation.

Stabilized systems provide a firmer, low-maintenance surface that resists migration and is better for heavy traffic or steep driveways common in Florida rainfall events. Downsides include higher material and installation costs and need for proper drainage and base preparation; some resin systems can be sensitive to prolonged standing water. Loose compacted gravel is cheaper and easier to refresh but will require more frequent topping up and regrading in Southwest Ranches' wet climate.

Expect to regrade low spots and washouts after heavy rains and to top up surface material every 1-4 years depending on traffic and storm exposure in Southwest Ranches. Weed control, edge containment, and periodic compaction will extend lifespan; well-built gravel driveways with a proper base can last 5-15 years before major rehabilitation. Frequent heavy truck use or poor drainage can shorten life, so address runoff and add fresh gravel as needed.

Yes, but load-bearing depends on base preparation and stone size more than type alone; crushed stone with angular particles compacted over a 6-8 inch engineered base will carry heavy vehicles better than loose rounded pea gravel. For regular heavy loads in Southwest Ranches, use crusher-run or 1.5" minus base rock, compact it, and consider geogrid reinforcement to reduce rutting. Consult a contractor for vehicle weights and expected use to size the base properly.

Material cost per ton typically runs lower for crushed limestone and shell and higher for decorative pea gravel: in West Florida ranges are roughly $20-$60/ton for limestone or shell and $30-$80/ton for pea gravel, depending on color and processing. Coverage depends on depth (1 ton covers about 80-100 sq ft at 2 inches); per-square-foot costs reflect both price per ton and coverage, so pea gravel often costs more per square foot at the same depth. Ask Hello Gravel for a local quote to see exact prices for your zip code and desired depth.

Permits and HOA rules vary: some HOAs in Southwest Ranches restrict loose gravel or require specific materials and edge treatments, and the Town may require permits if work alters drainage or connects to a public right-of-way. Before ordering material, check with your HOA covenants and the Southwest Ranches building department or town planning office for any approvals and specific compaction or base requirements. Hello Gravel can help you plan quantities and suggest installation options that meet common local requirements.

Installation costs vary by access and scope; supply-only orders through Hello Gravel start at the 3-ton minimum, while full installation (supply, spread, compact) often ranges from about $3 to $8 per sq ft for decorative gravel on a prepared base in Southwest Ranches. Equipment rental like a plate compactor is commonly $50-$100 per day, and contractor labor rates vary widely — expect hourly rates or flat bids depending on project size. For accurate pricing, request a bundled quote that includes material, delivery, and any spreading or compaction services.

Proper edge containment, good drainage, and a compacted base are the best defenses: install curbing, timber or stone edging, and slope the driveway to keep water off the surface. Use angular crushed stone for the lower layers and consider geogrid or resin stabilization to lock material in place in flood-prone spots. Regular maintenance after storms—regrading low areas and adding fresh material—will reduce long-term loss.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.