Fill Dirt in Good Hope, AL

In Good Hope and the West Alabama area, delivered fill-dirt typically ranges roughly from $12 to $30 per ton, depending on supplier, haul distance, and season. Prices can change with fuel costs and local availability, so check your zip code on Hello Gravel for up-to-date quotes and remember our minimum order is 3 tons.

A good rule of thumb for fill-dirt in this region is 1 cubic yard = about 1.2 to 1.4 tons, depending on moisture and clay content. Local suppliers commonly deliver with tri-axle dump trucks that hold roughly 10 to 14 cubic yards loose (about 12 to 20 tons depending on material), and Hello Gravel lists materials by tons at checkout.

For driveways, use compactable, low-organic structural fill below the surface and finish with a layer of crushed stone for drainage and wear resistance. For shed pads and building subgrade, a well-graded fill-dirt compacted in 6-inch lifts or a compacted stone base is recommended. For general yard grading, use clean fill-dirt to raise grades but cap exposed areas with topsoil to support vegetation and reduce erosion.

Alabama summers bring heavy, short-duration rain that can saturate clay-rich fills and lead to slow drainage and surface runoff. To avoid erosion and standing water, build proper slopes away from structures (at least 2% to 5% where practical), install swales or French drains where needed, and always compact fills in lifts to reduce settlement and washout.

Contractors in the Good Hope area commonly use plate compactors or jumping jacks for small jobs and ride-on rollers or tandem rollers for larger areas to achieve good compaction in layers. Material is usually charged per ton or cubic yard, while compaction and site prep are billed separately as equipment time or labor per hour or per job. Ask for a line-item estimate separating materials and installation so you can compare costs.

Minor yard fills usually do not require a permit, but significant grading, filling in floodplains, or work that affects streams, wetlands, or drainage often does require approval from Marshall County or state agencies. Check with the Marshall County Planning and Zoning office and the Good Hope town office before starting large fills, and consult the Alabama Department of Environmental Management for any wetland or erosion-control rules.

Contractors measure the area and desired depth, then use this formula: area (ft) x depth (ft) ÷ 27 = cubic yards; multiply cubic yards by about 1.2 to 1.4 to estimate tons for fill-dirt in this region. For example, a 50 ft by 10 ft area at 6 inches deep is 50 x 10 x 0.5 = 250 ft3 = 9.26 yd3, which is roughly 11 to 13 tons of fill-dirt.

Crushed stone or crusher-run is a better option when you need a stable, draining base for driveways or pads, while recycled concrete aggregate (RCA) can be cost-effective and stable if clean and well-graded. Fill-dirt is economical for raising grades or filling holes but is not a substitute for a structural, draining base under driveways or building pads in clay-prone Good Hope soils.

Most local suppliers will deliver and dump fill-dirt; some drivers may offer tailgate spreading by request, but spreading is done at the driver’s discretion and is not guaranteed. Delivery fees typically cover dumping and offloading, and any spreading, site prep, or compacting is usually quoted separately—use Hello Gravel’s checkout notes to request spreading and confirm services with the supplier.

A properly compacted fill-dirt base with an appropriate stone surface can last many years, but expect periodic maintenance: regrading, adding a few inches of stone, and re-compaction every 3 to 7 years depending on traffic and rainfall. After heavy storms check for washouts, recompact soft spots, and maintain drainage to extend the base's life.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.