Fill Dirt in Gadsden, AL

Typical delivered prices for fill-dirt in the Gadsden/Anniston area usually fall in the range of about $8 to $20 per ton, or roughly $6 to $15 per cubic yard. Final price depends on factors like moisture content, screening (clean vs. mixed), truck distance, and time-of-year; use your zip code on Hello Gravel to see exact local quotes.

Bulk fill-dirt in Etowah County commonly comes from local sand and gravel pits, landscaping yards, and construction earthwork contractors with dump truck fleets. Hello Gravel connects you with vetted local suppliers and contracted haulers serving Gadsden, so check our site for available vendors in your ZIP code.

Fill-dirt can compact well if it is a clean, low-organic mix with a balance of sand, silt, and fines and if it is placed in thin lifts and mechanically compacted. Very clay-rich or organic-bearing fill will perform poorly when wet, so ask suppliers for 'clean fill' or a gradation description and consider compaction testing for critical areas.

Volume for a 20 ft x 40 ft area at 4 inches equals about 9.9 cubic yards (20 x 40 x 0.333 ft = 266.7 cubic feet = 9.9 cu yd). Using a common conversion of about 1.3 tons per cubic yard for fill-dirt in this region, you would need roughly 13 tons (expect 12 to 16 tons depending on moisture and density).

Small deliveries for typical residential grading usually do not require a city hauling permit, but any project that changes drainage, involves significant grading, or affects wetlands may need permits from the City of Gadsden or Etowah County. HOA rules can be more restrictive, so always check with your homeowners association and call the City of Gadsden Building/Planning Department before large fills or regrading.

Gadsden's mild-humid climate with frequent summer storms means fill-dirt surfaces can be prone to erosion and rutting during heavy rain events; freeze-thaw damage is less severe than in colder climates but can still cause settling in small pockets. Good drainage, compaction, and a proper surface cap (crushed stone or gravel) will reduce maintenance and extend longevity.

Local contractors typically use plate compactors or rammers for thin lifts and small areas, and small vibratory rollers (or tandem rollers) for larger fills; skid steers are common for spreading. Rental or contractor pricing varies: DIY rental for a plate compactor is often $60 to $120 per day, small roller rental $150 to $400 per day, and contractor labor/compaction rates commonly run about $75 to $150 per hour depending on scope.

Fill-dirt is a cost-effective material for raising grade and filling low spots, but it holds water and drains poorly compared with crushed stone, so it is not ideal as a finished driveway surface. Crushed stone or bank-run gravel provides better drainage, traction, and durability as a wearing surface; a common approach is to use fill-dirt for bulk elevation and then cap it with 3/4" crushed stone for the driveway surface.

For vehicular access and farm equipment, fill-dirt may be acceptable as a subgrade if properly compacted, but it should be covered by a well-designed granular subbase (typically 6 to 12 inches of compacted aggregate) and a wearing course tailored to expected loads. Heavy or repeated axle loads should be reviewed with a civil engineer or local contractor, and consider a geotextile separation fabric to reduce rutting and mixing of materials.

Schedule deliveries for drier periods when possible, and avoid placing large lifts during heavy rain to improve compaction and reduce erosion risk. Use silt control (straw, wattles, silt fence) on slopes, compact in 4-6 inch lifts, and protect newly placed fill from runoff until it is stabilized or capped with aggregate to prevent washing and sediment runoff.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.