Gravel in Silverdale, WA

Approximate delivered ranges in the Silverdale area are: crushed rock/crusher run $30-55 per ton (about $42-77 per cubic yard), 3/4" minus or all-purpose road base $28-50 per ton (about $39-70 per cubic yard), pea gravel $40-75 per ton (about $56-105 per cubic yard), and clean 3/4" drainage rock $35-65 per ton (about $49-91 per cubic yard). Prices vary with supplier, delivery distance, access, and seasonal demand, so use these as ballpark figures and request a local quote via Hello Gravel for firm pricing.

Hello Gravel connects you with local suppliers and haulers that serve Silverdale and the Kitsap Peninsula; our platform standard minimum order is 3 tons, which matches many local suppliers' minimums. Many Silverdale deliveries are free on standard orders, but remote addresses, tight access, or very small loads can trigger delivery fees typically ranging from about $25 to $100; exact fees depend on supplier, truck type, and driveway access.

Use cubic yards and tons to order: 20x10 patio (200 sq ft) at 2" needs ~1.25 cubic yards (~1.8 tons) and at 3" ~1.85 cu yd (~2.6 tons; note Hello Gravel minimum is 3 tons). 12x40 driveway (480 sq ft) at 4" needs ~5.9 cu yd (~8.3 tons) and at 6" ~8.9 cu yd (~12.4 tons). 1,000 sq ft at 3" needs ~9.3 cu yd (~13.0 tons) and at 6" ~18.5 cu yd (~25.9 tons). Always round up 5-10% for compaction, settling, and waste.

For Silverdale's wet coastal climate prioritize angular, compacting mixes: crusher run (crushed surfacing) or 3/4" minus provides good compaction and stability for driveways, while a layer of clean 3/4" or 1-1.5" rock along edges aids drainage. Pea gravel drains well but moves and floats on slopes, so use it for low-traffic paths or decorative surfaces over a stable base. Add a geotextile underlayer and grade for runoff to reduce washouts and weed growth in this rainy environment.

Installed gravel driveways in Kitsap County commonly run roughly $3 to $8 per square foot depending on site prep, thickness, access, and materials chosen; simple installs near the lower end, difficult access or heavy excavation toward the higher end. Base prep (grading, compaction) and geotextile typically add $0.50 to $2 per sq ft, while hauling and spreading the gravel often make up the rest of the cost. Get onsite bids because slope, drainage work, and driveway width heavily influence price.

Expect light maintenance yearly (raking and spot regrading) and more thorough regrading or material top-ups every 2-5 years, with major renewal or base rebuilding possible every 10-20 years depending on use and drainage. Local costs vary: a homeowner regrade or small contractor visit might run a few hundred dollars, while professional regrading and a top-up of several tons typically costs a few hundred to a couple thousand dollars depending on quantity and access. Budget for periodic purchases of 1-5 tons for top-up and address drainage issues promptly to extend life.

Rules vary by neighborhood and jurisdiction; many Kitsap County and Silverdale homeowners do not need a permit just to change surface material, but any change that alters runoff, affects the county right-of-way, or modifies curb cuts may require permits or public-works approval. HOA covenants can be more restrictive, sometimes specifying allowed materials or appearance, so check your HOA rules before ordering. When in doubt, contact Kitsap County Public Works and your HOA to confirm local requirements and best practices for drainage control.

Gravel is the lowest upfront cost and provides excellent infiltration, which helps with stormwater, but it needs more frequent maintenance like regrading and topping up. Asphalt costs more up front and requires less routine attention but is impermeable and increases runoff, often needing stormwater management. Permeable pavers are the most expensive initially but offer excellent stormwater performance and low long-term maintenance when properly installed; choose based on budget, desired look, and runoff goals.

Use 1 cubic yard ≈ 1.4 tons as a practical conversion for most crushed gravels in our region, and always add 5-10% extra for compaction and waste. Hello Gravel's minimum order is 3 tons, deliveries come by tri-axle dump truck, and you can request tailgate spreading at checkout though drivers perform that at their discretion. If you have tight access, slopes, or narrow gates, note those in Order Notes so we can match an appropriate truck and avoid extra fees or delays.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.