Fill Dirt in Del City, OK

Typical delivered fill-dirt prices in Del City usually fall in the range of about $12 to $28 per ton, depending on source, moisture content, and haul distance. Using a common site conversion (1 cubic yard ≈ 1.2 to 1.4 tons), expect roughly $16 to $36 per cubic yard. Final price is zip-code specific, so check your exact quote on Hello Gravel for an accurate delivered cost.

Hello Gravel works with local suppliers and haulers serving Del City rather than one branded fleet, so available suppliers vary by zip code. Most suppliers require a minimum order of about 3 tons and deliver with tandem or tri-axle dump trucks (typically 10 to 16 tons per load); smaller deliveries may use smaller trucks at higher per-ton rates. See your Hello Gravel checkout to view specific suppliers, minimums, and truck sizes for your address.

Use cubic yards = area(ft2) * depth(ft) / 27 and then convert to tons (approx 1.3 tons per cubic yard). Examples: A 100 ft x 12 ft driveway at 4" depth is ~14.8 yd3 or ~19 tons. Raising a 1,000 ft2 yard by 3" is ~9.3 yd3 or ~12 tons. A 20 ft x 20 ft shed subbase at 4" is ~5.9 yd3 or ~8 tons. Backfill around a 30 ft perimeter footing at 12" depth is ~11.1 yd3 or ~14 tons. Always order 5-10% extra for settlement and compaction.

Del City sees hot summers, occasional freezes, and heavy rainstorms; those conditions influence settling, erosion, and drainage. Clayey fill-dirt can shrink in dry heat and heave with freeze-thaw cycles, so properly compacted, well-draining fills perform better. For areas exposed to heavy surface runoff, add drainage or use more granular material to reduce erosion and long-term maintenance.

Fill-dirt is generally fine-grained (silt and clay) and is appropriate for raising grades and some backfill but is not ideal as a driveway base. For driveway bases in Del City, use a well-graded granular base (crusher run or 3/4" minus) for strength and drainage, then top with paving or gravel. For foundation backfill and landscaping, use clean fill or engineered backfill with the recommended balance of sand and fines to control settling; if local soils are clayey, add sand or granular material to improve drainage and reduce shrink-swell.

Residential fills typically target 90-95% of maximum dry density per standard compaction tests; deeper lifts usually require 6-8" loose lifts with compaction between lifts. Homeowners can rent plate compactors or walk-behind rollers; contractors use larger plate compactors or small vibratory rollers. Equipment rental runs roughly $50 to $200 per day depending on size; contractor labor and equipment for spreading and compacting commonly ranges from about $60 to $120 per hour or $8 to $25 per ton depending on job complexity. Obtain local written quotes for exact costs.

Fill-dirt is usually the least expensive but has poorer drainage and strength than crusher run or clean granular base. Crusher run and limestone screenings offer better compaction, load-bearing capacity, and drainage for driveways and slab subbases but cost more per ton. Clean fill (primarily sand or gravel) drains best and is preferred where frost, runoff, or structural performance matters; choose material based on function rather than price alone.

Small residential fills are often allowed without a permit, but larger volume fills, changes to drainage or site grading, or work in regulated floodplain areas may require a permit and erosion control measures from Del City or Oklahoma County. Before large deliveries verify local requirements with Del City Planning/Public Works and always call 811 to locate underground utilities. If you are near property lines, easements, or wetlands, check neighborhood covenants and city codes first.

If fill-dirt is used alone as a driveway base you should expect surface settling, rutting, and more frequent regrading — often within 1 to 3 years under vehicle traffic. Properly prepared granular base with compacted fill-dirt subgrade will last much longer and only need occasional topping or regrading every 5 to 10 years. For lawns and landscape areas, expect some settling the first year and plan to top-dress or regrade low spots after the first growing season.

Yes, many local contractors offer bundled material+installation services that include delivery, spreading, and compaction. Typical bundled costs in the Del City area vary widely by scope but commonly range from about $18 to $45 per ton installed (including material and labor) or hourly crew rates of roughly $60 to $120 per hour. Always get itemized estimates that separate material, haul, spreading, and compaction so you can compare with Hello Gravel delivery plus DIY installation.

Measure the delivery area, mark preferred drop location, and note obstacles like low-hanging wires, gates, or landscaping before checkout. Request driver notes at order time, ask about tailgate spreading at checkout (drivers may do it at their discretion), and confirm access and allowable blocking of street or driveway with the city if needed. Contact Hello Gravel customer service promptly for changes, and allow 5-10% extra material to cover compaction and uneven spreading.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.