Fill Dirt in Meldrim, GA

Fill dirt is subsoil with little organic matter used to raise grades, fill holes, and build up building pads. In Meldrim it’s commonly used for yard grading, driveway approaches, and backfilling around foundations where topsoil or structural fill isn’t required. It is not the same as topsoil, so add topsoil if you plan to plant over it.

Prices vary by supplier, quality, and delivery distance, but in West Georgia fill dirt commonly runs about $8 to $25 per cubic yard delivered. Per ton pricing depends on material density, but that range roughly equals $6 to $20 per ton for most local fill dirt. Get a quote through Hello Gravel for a specific delivered price to your zip code.

A single truck delivery cost depends on the load size, distance, and supplier; a rough delivered range for a typical truckload of fill dirt in the area is about $150 to $500. Hello Gravel’s network uses tri-axle trucks and has a minimum order of 3 tons, with standard delivery in 2+ business days and optional next-day service for an extra fee. Request a quote in checkout to see exact charges for your address.

Most tri-axle dump trucks used by our suppliers carry about 10 to 12 cubic yards, which translates to roughly 12 to 18 tons of fill dirt depending on moisture and compaction. Exact capacity varies by truck and material moisture content, so Hello Gravel will confirm estimated tons when you order.

Yes, for most basic uses fill dirt is generally cheaper than crushed gravel or stone on a per-yard or per-ton basis because it is less processed. Gravel costs more because it is crushed, screened, and sometimes washed, but gravel may be preferable where drainage or surface traffic is a concern. Choose based on function: use fill dirt for bulk grading and gravel for finished surfaces and drainage.

Coverage depends on depth. As a rule of thumb, 1 ton of fill dirt is about 0.6 to 0.8 cubic yards, so at 1 inch depth it will cover roughly 200 to 260 square feet; at 4 inches it will cover about 50 to 65 square feet. Use the formula: (area in sq ft x depth in ft) / 27 = cubic yards, then multiply by the material density to convert to tons.

Buying in bulk (truckloads) from a local supplier is usually the most economical option, and using Hello Gravel lets you compare local suppliers and delivery fees in one place. Avoid bagged materials for large jobs, check whether recycled or screened fill is acceptable for your use, and request quotes for different delivery dates to find the best price. Remember Hello Gravel’s minimum is 3 tons, which helps keep per-ton costs lower than small orders.

Measure the area (length x width) and decide the depth you need, then use (area in sq ft x depth in ft) / 27 to get cubic yards. Convert cubic yards to tons by multiplying by a local density estimate (0.6 to 0.8 tons per cubic yard for typical fill dirt) and add 10% to 20% extra for compaction and settling. Or use Hello Gravel’s material calculator and select Fill Dirt to get a quick estimate.

Drivers may be able to perform tailgate spreading at their discretion, but this is not guaranteed and depends on safety, access, and truck positioning. Request tailgate spreading at checkout and the driver will assess whether it can be done safely upon arrival. For precise grading and compaction, hire local equipment or a landscaper after delivery.

Yes, fill dirt will settle over time, especially if placed in large lifts without compaction or if it contains organic pockets. Reduce settlement by placing fill in lifts, compacting each layer with a plate compactor, and allowing time for settlement before final grading or construction. For structural work near foundations or driveways in Meldrim, consult a local contractor or geotechnical engineer to specify compaction requirements.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.