Fill Dirt in Rochelle, GA

Local delivered fill dirt prices in the Rochelle area typically run roughly $10 to $25 per cubic yard, which converts to about $8 to $19 per ton (using ~1.3 tons per cubic yard). Prices vary by supplier, load size, and delivery distance, so contact Hello Gravel for a precise quote for your zip code.

A typical tri-axle dump truck for fill dirt carries about 10 to 12 cubic yards (roughly 13 to 16 tons). Using the mid-range price above, a single truckload of material can cost several hundred dollars in material alone; delivery fees may be included in some areas or added depending on distance and access, so ask Hello Gravel for a delivered price.

To raise 1,000 square feet by 6 inches (0.5 ft) you need 500 cubic feet, which is about 18.5 cubic yards. That is roughly 24 to 25 tons of fill dirt; we recommend ordering 5% to 10% extra to allow for settling and compaction, so round up to about 19 to 20 cubic yards (25 to 28 tons).

One cubic yard (27 cubic feet) covers about 162 sq ft at 2", 81 sq ft at 4", and 54 sq ft at 6". Using a common conversion of 1 cubic yard ≈ 1.3 tons, one ton covers roughly 125 sq ft at 2", 62 sq ft at 4", and 42 sq ft at 6". Actual coverage can change with moisture and material density, so measure on site when possible.

For a driveway base, crush-and-run (crush-and-run or crusher run) generally performs better because it compacts well and sheds water, making it more durable under traffic. Fill dirt is usually cheaper per cubic yard for bulk grade raising but contains fines and organics that impede drainage and compaction, so it is not recommended as a driveway base in Rochelle's climate and soils.

The most reliable and often lowest-risk sources in the Rochelle area are local quarries and established landscapers or contractors that supply screened, tested fill. Construction clean fill can be cheaper but may contain debris or variable material; always ask for a description of the material and check for contaminants. Hello Gravel can connect you to local suppliers and provide pricing so you can compare options.

Shale can be cheaper in some areas, but it is usually a poor choice for driveways and many grading jobs because it breaks down into fine powder and can create drainage and compaction problems over time. Using shale risks long-term settling, dust, and poor performance in wet conditions, so we normally recommend engineered base materials (crush-and-run) or clean compactable fill instead.

Crush-and-run is typically more expensive per cubic yard than raw fill dirt but less expensive in the long run because it compacts into a strong base and requires less material and maintenance. Compared with plain gravel, crush-and-run binds better and provides a firmer surface; if you want a durable driveway in Rochelle, budget a bit more for crush-and-run rather than using fill dirt as a base.

For backfilling near foundations, choose low-organic, well-graded, compactable fill (engineered or clean structural fill) rather than topsoil or raw excavation dirt. Place in thin lifts and mechanically compact each layer to reduce settling, and slope grade away from the foundation to promote drainage; consult structural or geotechnical guidance for foundation-critical work.

Hello Gravel generally requires a minimum order of 3 tons and standard delivery lead time is 2+ business days. Next-day delivery is available for orders placed before noon CST for an additional fee, and delivery fees vary by supplier and distance—many areas offer free delivery but check your zip code at checkout. Tailgate spreading can be requested at checkout but is performed at the driver's discretion and not guaranteed.

Reduce settling by using clean, low-organic fill, placing material in 4- to 6-inch lifts, and compacting each lift with a plate compactor or roller. Control moisture during compaction, consider geotextile fabric over soft spots, and plan to order 5% to 10% extra material to allow for settlement and future adjustments.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.