Fill Dirt in Blairsville, GA

Typical delivered fill dirt prices in the Blairsville area usually fall in the range of about $10 to $30 per ton, depending on supplier, moisture content, and local availability. Hello Gravel requires a 3-ton minimum order; delivery fees vary by distance, truck type, and site access and will be shown upfront during checkout. For an exact quote, enter your zip code or contact our team.

Fill dirt density varies, but a practical conversion for Blairsville projects is 1 cubic yard = about 1.2 to 1.4 tons (use 1.3 tons/yd3 as a rule of thumb). Examples: a 10x10 garden bed at 6 in deep is ~1.9 yd3 (≈2.5 tons), a 20x40 driveway base at 6 in is ~14.8 yd3 (≈19–21 tons), and a small foundation backfill of 300 ft3 is ~11.1 yd3 (≈14–15 tons). When in doubt, request a supplier estimate based on measured dimensions.

Fill dirt can be used on clay soils and slopes as general subgrade or for raising grade, but it is not a finish surface for traffic or erosion-prone slopes. In Blairsville's mountain terrain with clay pockets, you should expect extra compaction effort and erosion control; for slopes or areas with poor drainage, combine fill dirt with proper drainage measures, geotextile, or more engineered aggregate. For driveways and exposed surfaces, use fill dirt only as a compacted subbase and top with crusher run or clean gravel for drainage and wear resistance.

Yes. Hello Gravel works with a network of vetted local suppliers and haulers that deliver screened and unscreened fill dirt by the ton in the Blairsville/Union County area. Enter your zip code on our site or contact our team to get supplier options, pricing, and delivery windows for your address.

Compact fill dirt in 6- to 8-inch lifts using a plate compactor for small jobs or a vibratory roller for larger areas until the desired density is reached; moisture conditioning often improves compaction. Use geotextile fabric where the subgrade is soft, on steep slopes, or over native clay to separate materials and reduce rutting. Always evaluate drainage first—adding geotextile and a structural base (crusher run) improves long-term performance under vehicle loads.

Yes. Blairsville’s mountain climate means spring rains and fall storms can make deliveries and compaction difficult; schedule earthmoving in drier months when possible. Winter freeze is usually light compared with northern states but can still affect compaction and trucking in cold snaps; plan deliveries at least 2 business days out and check weather on your selected delivery date.

Fill dirt is less expensive per ton but poor for exposed surfaces because it compacts to a dense, often impermeable layer that can hold water and erode. Crusher run is designed to interlock and drain, making it a better structural base and driving surface; clean gravel is preferred for the wearing course because it sheds water. Use fill dirt for bulk filling and grade adjustment, then place crusher run or clean gravel on top for the driveway surface.

Large stockpiles, earthmoving, or any work that affects drainage or public right-of-way may require permits or erosion control measures from Union County or the City of Blairsville. Rules vary by project size and location, so check with the Union County Building and Planning Department or the City of Blairsville before significant deliveries. If you are unsure, contact our team and we can point you to local resources.

When used properly as compacted subbase under a well-designed aggregate surface, fill dirt can perform for many years with minimal maintenance. If left as an exposed surface, fill dirt will rut, erode, and require frequent regrading, especially in heavy rain. Regular grading, adding drainage, and topping with suitable driveway material will greatly extend performance in Blairsville’s wet seasons.

For small to medium jobs in Blairsville, expect equipment rental (skid steer, mini-excavator, compactor) to run about $200 to $600 per day, with local labor or contractor rates typically between $40 and $80 per hour. A contractor handling hauling, spreading, and compaction for a typical foundation backfill (roughly 10–20 tons) could run from a few hundred to a couple thousand dollars depending on site access, complexity, and haul distance. Get a site-specific estimate through Hello Gravel or a local contractor for an accurate budget.

Measure the area and provide clear delivery notes about driveway width, overhead clearance, and preferred drop location; Hello Gravel displays delivery windows and upfront fees so you can schedule around weather and access. Request tailgate spreading at checkout if you want the driver to help, but remember spreading is at the driver's discretion and not guaranteed. For difficult sites, consider hiring a local operator to spread and compact immediately after delivery to avoid wasted material and erosion.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.