Fill Dirt in West Lakestevens, WA

Typical delivered prices for bulk fill-dirt in the West Lakestevens / West Washington area usually range from about $18 to $45 per ton, depending on haul distance, access, truck type, and time sensitivity. Hello Gravel lists many areas with free standard delivery, but next-day service or difficult access can add fees. Always request an itemized quote for material, delivery, and any tailgate-spreading fees.

A practical rule for residential fill-dirt is to assume about 1.2 to 1.5 tons per cubic yard, which corresponds to a typical bulk density of roughly 80 to 100 lb/ft3 depending on moisture and soil type. Heavier, wetter, or clay-rich fills will be toward the upper end of that range, while dry, sandy fill will be lighter. Ask your supplier for a specific tons/yd3 figure if you need an exact estimate.

Volume = 1,000 ft2 x 0.5 ft = 500 ft3, which is about 18.5 cubic yards. Using 1.2–1.5 tons per cubic yard gives an estimated 22 to 28 tons of fill-dirt, with a typical working estimate around 24 tons. Add 5–10% extra to cover compaction and settlement, and remember Hello Gravel minimum orders start at 3 tons.

For driveways in West Lakestevens' rainy climate, crushed rock or engineered base materials are usually a better choice because they drain and interlock under load. Fill-dirt is best for bulk grading, raising low spots, or as a subfill under engineered layers, but pure fill-dirt can retain water and settle over time. If you plan to pave or build a driveway, plan on a compacted granular base and use fill-dirt only where specified by a contractor or engineer.

For yard fill and under lawn in West Lakestevens, ask for a lean, well-graded sandy fill with limited clay content (typically less than 20% fines) so it compacts evenly and drains reasonably well. If you need structural performance, request an engineered fill or a gradation/sieve analysis from the supplier. Always tell the supplier the intended use so they can recommend the right gradation for local rainy conditions.

Hello Gravel connects you to trusted local suppliers and haulers that serve West Lakestevens; you can check availability by entering your zip code on our site. Typical minimum orders from suppliers working with dump trucks are about 3 to 5 tons, while common truck loads (tri-axle) deliver 12 to 20+ tons. If you need less than a truckload, ask about split deliveries, yardage bags, or local landscapers who may sell smaller quantities.

Proper compaction for fill-dirt generally means placing material in 4 to 8 inch lifts and compacting each lift to the specified density; structural work may require testing (proctor/compaction tests). Typical contractor or rental costs for compaction range from about $0.50 to $2.00 per square foot depending on equipment and access, or roughly $300 to $1,500 for many small residential jobs. For driveways or foundations, hire a contractor to perform compaction testing and provide a compaction certificate if required by local building officials.

Fill-dirt with significant fines or clay can retain water, settle, and heave during freeze-thaw cycles common in West Washington if not properly compacted and drained. In heavy rainfall, poorly draining fill will cause saturation and longer-term settlement or slope creep. Minimize issues by using appropriate material (lean sandy fill or engineered fill), compacting in lifts, and adding drainage features like French drains or gravel layers where needed.

Small landscaping fills are often allowed without a permit, but larger fills, changes to drainage, or work near wetlands or streams can require city or county permits in Washington. Check with the City of West Lakestevens building and land use department and the Washington State Department of Ecology for regulations affecting imported soil, especially if you are moving more than a few cubic yards or altering stormwater flow. When in doubt, contact local authorities before delivery to avoid stop-work orders or additional fees.

Contractors commonly price projects by material weight (per ton) or volume (per cubic yard), then add delivery and installation fees; you may also see flat job quotes for larger projects. Spreading and grading are often charged separately—expect spreading rates in the range of $10 to $25 per cubic yard or hourly labor rates of about $40 to $90 depending on crew size and access. Always ask for an itemized quote that separates material, delivery, spreading, compaction, and any testing or permit fees.

Before delivery, clear the intended dump area and confirm access, overhead obstructions, and preferred drop location in your order notes. At delivery, confirm the material looks consistent with your order and take photos; if you requested tailgate spreading, note that drivers may do it at their discretion and it is not guaranteed. Contact Hello Gravel customer service promptly if the load is incorrect, hard to access, or causes damage so we can help resolve the issue.

To reduce settling and drainage problems on slopes, place fill in thin lifts (4 to 8 inches), compact each lift, and install drainage measures like swales, French drains, or gravel bands to move water away from the fill. Use geotextile fabric on steep areas to reduce erosion and consider terracing or retaining walls for larger grade changes. For critical slopes or foundation work, use an engineered fill design and consult a local civil engineer.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.