Gravel, Sand & Bulk Material Delivery in Onalaska, WA

Start with the project requirements: load-bearing surfaces need more durable, well-graded materials while garden beds and paths can use looser, decorative aggregates. In Onalaska’s wet climate prioritize materials that drain well and compact if needed; you can also add a compacted base or geotextile for stability. Consider appearance, price, and maintenance, and use our material quiz or contact our team for personalized guidance.

Local rainfall and forested soils increase the need for good drainage and erosion resistance, so choose materials that shed water and minimize rutting. Avoid very fine, loose materials in areas that will see vehicle traffic, and consider larger, well-graded aggregates or properly compacted base layers for driveways and paths. Plan for proper slopes and drainage channels to move water away from structures.

Prices vary by material type and supplier, but many homeowners in the area see ranges roughly between $25 and $120 per ton (or about $30 to $150 per cubic yard) including basic delivery, depending on the product and distance. Hello Gravel requires a minimum order of about 3 tons and offers standard delivery with no extra fee in many areas; next-day delivery is available for an additional fee when ordered before noon CST. Final price depends on material, local supply, and site access, so get a quote for an exact cost.

Aim for late spring through early fall for the driest conditions and easiest installation, and avoid scheduling heavy earthwork during extended wet periods. Allow at least 2+ business days for standard delivery and request next-day delivery early in the day if you need faster service. Also plan time for compaction or settling after delivery before heavy use.

Check road width, overhead clearances, bridge or weight-restricted routes, and turnaround space for tri-axle trucks. Note driveway slope, gates, or low-hanging lines that could block a dump, and be ready to communicate any tight access points or preferred offload locations in Order Notes. If access is limited, smaller trucks or different offload methods may be arranged at additional cost.

Measure the area in square feet, multiply by the desired depth in feet to get cubic feet, then divide by 27 to convert to cubic yards. For many common aggregates, expect roughly 1.2 to 1.6 tons per cubic yard depending on the material and moisture; check the material-specific page or ask our team for exact density. Always buy a little extra (about 5-10%) to allow for compaction and grading.

Local rules vary, so check with the City of Onalaska and Lewis County planning or public works before large deliveries, especially if you are changing grades, filling low spots, or working near wetlands. Permit requirements can apply to erosion control, significant fill, or work near streams and septic systems. When in doubt, contact local authorities or ask our team for guidance on common local requirements.

Some suppliers and contracted haulers offer installation services or can refer local contractors, but availability varies by supplier and job type. Hello Gravel connects you with trusted local suppliers and can often point you toward contractor options; confirm scope, pricing, and scheduling directly with the supplier or referred contractor. For larger projects, get multiple bids and verify licenses and insurance.

Think about function first: materials that are coarser and well-graded tend to drain better, while finer materials compact more tightly for stable surfaces but may impede drainage. There is usually a trade-off between cost, appearance, and performance, so select a material that matches your priorities for drainage, load-bearing, and maintenance. If you need both drainage and compaction, consider a layered approach with a compacted base and a more permeable top layer.

Recycled aggregates and clean fill can be cost-effective and environmentally friendly options, but availability and quality vary locally due to regional sourcing. Ask suppliers about material source, testing, and any restrictions on using recycled material for structural or permitted work. For projects near sensitive areas or where regulations apply, confirm that recycled materials meet local standards before ordering.

Drivers may be able to perform tailgate spreading at their discretion; you should request this service at checkout and note that it is not guaranteed. Standard delivery typically requires at least 2+ business days, with next-day options available for an extra fee if you order early in the day. On delivery day, clear access, confirm the drop location, and be available or provide clear instructions to avoid delays.

Because Hello Gravel sources regionally, texture and color can vary from photos; if a material looks different or there is an issue, contact customer service promptly so we can work to resolve it. Keep photos and notes about the delivery and review our refund policy for details on next steps. Timely communication makes it easier to adjust orders or address concerns before materials are put into permanent use.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.