Gravel in Sapulpa, OK

Delivered gravel in Sapulpa typically runs between about $20 and $45 per ton depending on material, quantity, and distance from the quarry. Contractors ordering large loads often get lower per-ton pricing while homeowners ordering near the 3-ton minimum pay toward the higher end; local haul or fuel surcharges of $25-$150 can apply for long hauls or small loads. Hello Gravel shows up-front pricing for your zip code and can connect you with local suppliers for an exact delivered quote.

For durable driveways in Sapulpa, angular crushed stone (crushed limestone) and #57 crushed rock are top choices because they lock together and resist rutting under Oklahoma weather. Pea gravel is attractive and good for low-traffic areas but can shift and scatter on driveways with steep grades or heavy use. Use larger, angular base material under a finer wearing layer for best long-term performance.

Use this quick method: square feet x depth (in inches) / 324 = cubic yards, and multiply cubic yards by about 1.4 to get tons (1 cu yd ≈ 1.4 tons). Example estimates: a single-car 10x20 at 4" needs ~2.5 cu yd ≈ 3.5 tons; a two-car 20x20 at 4" needs ~4.9 cu yd ≈ 6.9 tons; a 12x100 single-lane at 4" needs ~14.8 cu yd ≈ 20.7 tons. Order about 10% extra to allow for compaction, grading, and spillage.

Hello Gravel connects you with local quarries and haulers around Sapulpa and the greater Tulsa/West Oklahoma region rather than requiring you to call each supplier. Typical delivered price ranges (estimates) are: crushed limestone/#57 $20-$45 per ton, crushed rock $25-$50 per ton, and pea gravel $30-$70 per ton; per-yard pricing corresponds roughly using 1 cu yd ≈ 1.4 tons. Prices vary with material type, season, and haul distance, so check your zip code on Hello Gravel for an exact local quote.

Sapulpa has hot summers, periodic heavy rain, and occasional freeze-thaw in winter; heat can cause dust and loosening while rain and freezes contribute to washouts and potholes. Good drainage and proper crown/grade reduce washouts, and you should regrade and add top dressing after significant storms. Expect to inspect and do light maintenance yearly and add more gravel or full regrading every 1-3 years depending on traffic.

Installed costs in Sapulpa commonly range from about $1.50 to $4.00 per square foot, depending on site prep, base depth, material type, and equipment access. For example, a 20x20 (400 sq ft) driveway could cost roughly $600 to $1,600 installed; deeper base, drainage work, or heavier-load specifications raise the price. Get a local on-site quote through Hello Gravel or a local contractor for an accurate estimate for your property.

Deliveries are typically made by tri-axle dump truck and Hello Gravel requires a 3-ton minimum order; standard delivery is 2+ business days with next-day available if ordered before noon CST for an extra fee. Drivers will place material at a safe drop location and may offer tailgate spreading at their discretion; confirm access, overhead lines, and exact drop point in Order Notes. If you need placement in a tight area, mention it at checkout so the hauler can assess feasibility.

Yes, you can add color or texture notes at checkout and Hello Gravel will pass those preferences to local suppliers, but exact matches cannot be guaranteed because materials are regionally sourced. Sapulpa-area stone can vary in shade and texture due to local geology, so expect natural variation. If color is critical, request a sample or ask your supplier about available blends before delivery.

Regular maintenance includes regrading to restore crown, filling potholes with fresh stone, and compacting surfaces after repairs; address drainage issues promptly to prevent recurring washouts. Light traffic driveways usually need a top-up of 1-2 inches every 1-3 years, while busier driveways may need re-surfacing more frequently. For stubborn ruts or erosion, add a deeper base layer and improve subgrade drainage before replacing the wearing course.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.