Fill Dirt in Tillery, NC

Expect delivered fill dirt in Tillery to generally run about $10 to $20 per ton, or roughly $12 to $28 per cubic yard, depending on local availability, haul distance, moisture, and whether the material is screened. Rural deliveries to Montgomery County can sit toward the higher end because of longer truck runs. For an exact price, request a quote for your zip code through Hello Gravel (minimum order 3 tons).

Typical suppliers in the Tillery area include local landscape suppliers, excavation and grading contractors, and aggregate yards that serve Montgomery County. Hello Gravel connects you to vetted local suppliers and contracted dump truck fleets so you get local sourcing and scheduled delivery without calling multiple vendors.

Use these quick conversions: 4" depth = 0.0123 cubic yards per sq ft (≈0.016 tons per sq ft); 6" = 0.0185 cu yd per sq ft (≈0.024 tons); 12" = 0.0370 cu yd per sq ft (≈0.048 tons). For an easier planning scale, per 100 sq ft you need about 1.23 cu yd (≈1.6 tons) at 4", 1.85 cu yd (≈2.4 tons) at 6", and 3.70 cu yd (≈4.8 tons) at 12%. Actual weight varies with moisture and compaction, so order a little extra for settlement and grading.

Fill dirt can raise grades and fill low spots in Tillery, but because it often contains fines and clay it drains slower and can hold water in heavy rains common to West North Carolina. For areas subject to freeze-thaw or load (driveways, pads), combine well-graded granular backfill and thorough compaction to reduce frost heave risk. If you're unsure about site soils or bearing needs, a local contractor or geotechnical consult is recommended.

For driveways, use fill dirt only to raise grade, then place a well-graded, compactable base (crushed stone or bank-run gravel) and compact in lifts for strength. For general yard grading, screened fill dirt or engineered topsoil mixes are fine for shaping and planting areas. For building pads, use engineered fill or clean structural fill compacted to specification; native fill dirt alone is usually not appropriate for structural foundations without testing and compaction control.

Small residential deliveries and minor grading typically need no special permit, but any earthmoving that changes drainage, affects streams, or disturbs one acre or more may need local permits and erosion control plans. Check with Montgomery County planning and any Tillery/HOA rules before you start, especially for slope changes or work near waterways. When in doubt, call the county office or include a note in your Hello Gravel order so you can plan accordingly.

Properly placed and compacted fill dirt will be stable for years, but expect some initial settlement during the first season after installation, especially after heavy rain. Areas with poor drainage or high clay content may stay wet and require regrading, added drainage, or replacement with granular material for long-term performance. Regular maintenance—reshaping low spots and improving surface drainage—keeps the area functional through freeze/thaw cycles.

Fill dirt contains fines and organic traces and is best for filling and grading where surface drainage and vegetation matter more than load-bearing. Crushed stone and #57 are angular, drain well, and make better structural bases for driveways and pads. Bank run is a mixed naturally graded material useful for base layers but less consistent; clean fill is free of contaminants and organics and is preferred where stability and permit compliance matter. Choose materials based on drainage, load, and permit needs.

Hello Gravel requires a 3-ton minimum order and standard delivery is 2+ business days, with next-day available if ordered before noon CST for an extra fee. Deliveries are typically by tri-axle dump truck; drivers will dump in the agreed general area but tailgate spreading is discretionary and depends on site access and safety. On narrow or steep rural driveways, communicate access details at checkout and consider staging a spot to dump or hiring local help to spread and move material as needed.

Drivers will do their best to place the load where safe and practical, but exact placement is limited by truck access, slope, obstacles, and safety. Request placement instructions in Order Notes and ask for tailgate spreading at checkout, but expect the driver to assess feasibility on arrival and decline if unsafe. For precise placement, plan to have shovelers or equipment on site or hire a local contractor to spread after delivery.

For small patches and landscaping, a gasoline plate compactor or vibrating tamper is usually sufficient for compaction in 3- to 6-inch lifts. For larger areas like driveways or pads, a rental vibratory roller or larger compaction equipment and compaction in layers is recommended to meet density needs. Use geotextile fabric to separate poor, wet subgrades from fill or when stabilizing soft spots; for structural work consider a geotechnical recommendation and use engineered fill where required.

Ordering 5% to 10% extra material is a common rule of thumb to cover settlement, grading waste, and minor measurement differences for residential projects around Tillery. If the area is uneven or you plan significant regrade, consider 10% to 15% extra. Contact Hello Gravel for help estimating quantities and to adjust your order before dispatch.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.