Fill Dirt in Pollocksville, NC

Delivered fill dirt prices in the Pollocksville area typically range depending on supplier, distance, and quantity. Expect roughly $10 to $30 per ton delivered for small to mid sized orders, with contractors often seeing lower per-ton rates on larger bulk deliveries. Hello Gravel requires a 3-ton minimum, shows upfront pricing at checkout, and can provide a firm quote for your zip code and project size.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards, which is roughly 22 to 25 tons of fill dirt depending on density. Use this quick formula: cubic yards = (square feet * depth in inches) / 324, then multiply cubic yards by your estimated tons per cubic yard (commonly 1.1 to 1.4 for fill dirt). Remember to order extra (5-10%) to allow for compaction and settling.

Fill dirt can be used to build up grade but is not usually the best wearing or load-bearing layer for driveways. Local contractors in the Pollocksville area typically recommend crusher-run or compacted crushed stone for the subbase and surface because those materials drain better and compact to a harder, more stable surface in heavy-rain areas. If you must use fill dirt for raising grade, cap it with several inches of compacted base stone before putting down surfacing material.

Performance depends on the fill dirt's composition: clay-rich fill can hold water, expand, and shrink with freeze-thaw cycles, causing more movement, while sandy or granular fill drains better. In West North Carolina’s mix of freeze-thaw and heavy rains, contractors often prefer well-graded, compacted fill with good drainage and a stone cap to reduce settling and washout. Always grade for positive drainage and consider geotextile or drainage layers on slopes or wet spots.

Contractors in the Pollocksville area commonly request 'clean' fill dirt that is free of organic debris for structural fill and septic backfill, and they prefer well-graded, compactable material for general grading. For septic areas, local codes often require material that drains and compacts predictably—ask your inspector or contractor before ordering. For driveway bases, most pros will use structural fill only to build grade and then place compacted base stone for strength and drainage.

A properly compacted driveway base that uses fill dirt only to raise grade and is capped with compacted base stone can last 10 to 20+ years with routine maintenance. If the surface is turf or gravel over uncompacted fill dirt, expect more frequent settling and annual to biennial regrading or adding material. Regular inspection after heavy rains and spot regrading or adding stone will keep the driveway stable longer.

Yes—large earthwork or fill projects in Jones County may trigger permitting or erosion-control rules, especially near waterways, wetlands, or floodplains. For projects that change drainage patterns or move substantial material, contact the Jones County Planning Office and the North Carolina Department of Environmental Quality (NCDEQ) to confirm requirements and best practices. When in doubt, ask Hello Gravel or your contractor to help verify permit needs before delivery.

Many local suppliers and haulers can deliver and some offer spreading or can connect you with equipment operators, but driver tailgate spreading is always at the driver's discretion and not guaranteed. Machine spreading and compaction (skid steer plus plate compactor or roller) is commonly available through contractors and rental companies; typical labor/equipment rates vary widely but commonly fall in the $100 to $300 per hour range depending on equipment and travel. Add those service costs to your material quote and request them at checkout; Hello Gravel will note delivery options and you can discuss spreading/compaction with the supplier.

Fill dirt is mostly mineral material with little organic matter, so it’s good for raising grade and structural fill but poor for growing grass without a topsoil cap. Topsoil is the right choice for lawn repair because it contains organic matter and nutrients for seed and sod, while sand improves drainage but does not support plant growth on its own. For drainage problems, a combination—fill dirt for grade, a layer of clean sand or gravel for drainage, and a topsoil cap for planting—is often recommended.

Average costs for compacted fill dirt in the West North Carolina area can vary, but a typical delivered range is about $10 to $30 per ton depending on distance, supplier, and whether compaction is included. Compaction services and materials testing add to the cost; fully installed compacted fill (material plus labor and equipment) will push the total higher, often billed by the hour or as a project line item. For an accurate, current price for your Pollocksville job, check your zip code on Hello Gravel or request a quote so we can factor local supply and delivery into the price.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.