Fill Dirt in East Bonneterre, MO

Fill-dirt is soil used to raise grade, fill low spots, or backfill trenches and foundations. In East Bonneterre it is commonly used to level yards, build up driveways before a gravel or crushed-stone base, and to bring sites to desired elevation; it is not typically recommended as a wearing surface because it can rut and wash out in heavy Missouri rains.

For 1,000 sq ft: 3" (0.25 ft) = about 9.3 cubic yards, 6" (0.5 ft) = about 18.5 cubic yards, and 12" (1.0 ft) = about 37.0 cubic yards. Using a typical compacted weight of 1.2 to 1.6 tons per cubic yard, expect roughly 11-15 tons for 3", 22-30 tons for 6", and 44-60 tons for 12"; actual weight varies with moisture and soil type.

Prices vary by supplier, distance, and site access, but a typical delivered range in West Missouri is about $8 to $20 per ton. That converts roughly to $11 to $30 per cubic yard using common density assumptions; exact pricing is shown at checkout after we match you with local suppliers.

Hello Gravel connects you with local quarries, farms, and gravel yards that supply fill-dirt in the West Missouri area. Minimums vary by supplier and truck routing; Hello Gravel requires a 3-ton minimum order, while some local suppliers prefer deliveries of 5 to 10 cubic yards or more for efficient routing—your checkout will show the supplier minimums for your zip code.

Fill-dirt can be prone to heaving, settling, and saturation in East Bonneterre’s freeze-thaw cycles and heavy rains, especially if it contains clay or organic material. Crushed stone drains and locks together better and is far better for driveways and high-traffic areas, while topsoil is better for planting; use fill-dirt mainly for raising grade and backfill, and cover it with a suitable drainage layer or surface material for durability.

Place fill-dirt in uniform lifts of 6 to 8 inches loose, and compact each lift with a plate compactor for small areas or a vibratory roller for larger jobs. Aim for a high degree of compaction (typically 90%+ of standard Proctor where required) and have a geotechnical engineer or local building inspector specify compaction requirements for load-bearing foundations.

Permit and inspection requirements vary by city and county; many residential projects that change grade, affect drainage, or alter a floodplain require permits or a grading plan. Contact the East Bonneterre or county building department before you begin, and consult Hello Gravel or your contractor if you need material delivery timed around permit conditions.

Standard deliveries are made by tri-axle dump trucks; they are cost-effective per ton but need clear access and enough turning radius. For tight access, smaller trucks or offloads into a smaller vehicle may be required and usually cost more per ton due to extra handling and time—note any access restrictions at checkout so we can match the right truck and provide accurate pricing.

If left as a bare dirt surface, expect regular grading, filling low spots, and erosion repairs after heavy rains; rutting and vegetation can appear within a single season. For a low-maintenance route, place fill-dirt only to establish grade and then install a properly compacted aggregate base (crusher run or stone) or pavement; that approach greatly reduces upkeep and extends service life.

Fill-dirt is generally the least expensive option and good for raising grade and backfill, but it does not provide a stable, durable driving surface. Crusher run is crushed stone with fines that compacts into a strong base for driveways, while bank run is natural, uncrushed gravel that can be less consistent. For long-lasting driveways in our West Missouri climate, a compacted crusher-run base with a wearing layer is usually the better-performing choice.

Yes, for sloped terrain or areas prone to flooding or poor drainage in East Bonneterre, a geotextile fabric plus a drainage layer (coarse gravel and/or perforated drain pipe) will reduce erosion, prevent fine soil migration, and improve stability. The exact specification depends on slope, soil type, and project use—ask a local contractor or engineer for recommendations and note drainage needs in your Hello Gravel order notes.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.