Fill Dirt in Chesterfield, MO

Fill-dirt is soil with a high proportion of fines and little to no large rock, used to raise or grade a site rather than as a finished surface. In Chesterfield you can expect local fill-dirt to reflect Missouri geology: often clayey or silty, varying in color from brown to reddish brown, and may contain occasional small gravel or organics depending on source.

Prices vary by supplier, quantity, and access, but fill-dirt is generally one of the least expensive bulk materials. In the St. Louis/Chesterfield area customers commonly see delivered ranges that depend on order size and truck access; contact our checkout or sales team for a precise quote and the most up-to-date local pricing.

A good planning assumption is 1 cubic yard of fill-dirt equals about 1.2 to 1.5 tons depending on moisture and clay content; Chesterfield clay soils tend toward the heavier end of that range. For examples: a 10 ft x 20 ft area raised 6 inches needs about 5 cubic yards (roughly 6.5 to 7.5 tons); use our online calculator or request help for precise estimates.

For structural fills under pads or engineered drive approaches, contractors in the Chesterfield area commonly specify 90% to 95% Standard Proctor compaction, placed in 6 to 8 inch lifts and compacted with a plate or roller. Typical fill-dirt gradation is fine- to medium-textured soil with minimal large rock; engineers may require tested import material for critical loads, so confirm specs with your contractor or building official.

Fill-dirt is not recommended as a finished driveway surface because it's fine and can rut or become muddy; in Chesterfield's climate and clay soils that performance problem is amplified. Use fill-dirt to raise or grade the subgrade, then install a proper crushed stone or crushed-rock wearing surface and geotextile as needed for driveways.

Chesterfield experiences freeze-thaw cycles that can cause fine, poorly drained fill-dirt to heave, settle, or become unstable if not compacted and drained properly. To reduce issues, use well-compacted lifts, prefer less-expansive fill or mixed granular material where possible, and provide positive surface and sub-surface drainage to move water away from the filled area.

Common best practices in Chesterfield include a geotextile fabric over soft soils, a compacted crushed-rock base under driveways, and perforated drain tile or French drains where groundwater is a concern. Contractors often add a thin granular layer (crushed stone) between fill-dirt and finished surfaces to improve drainage and reduce frost-related movement.

A properly compacted and drained fill can perform well for many years and is generally stable for permanent grading or building pad work. For lawn or non-structural areas expect some settlement during the first 1 to 3 years and plan for occasional top-up or regrading; inspect after heavy rains and re-seed or add topsoil as needed to maintain grades and vegetation.

Permit requirements depend on the project scale and whether it affects drainage, floodplains, or adjacent properties; small yard fills often do not require permits but larger regrading, retaining walls, or changes that alter stormwater flow may. Always check with the City of Chesterfield Planning and Public Works (or St. Louis County if applicable) before large deliveries to confirm permit, erosion control, and tree-protection rules.

Fill-dirt is best for raising grades and backfilling where compaction and vegetation are the goals, while recycled concrete and crushed stone are more appropriate for structural bases and finished surfaces because they drain better and lock together. For a Chesterfield driveway, a combination is common: fill-dirt to build subgrade height, then crushed stone or RCA as the compacted wearing base.

Provide clear details at checkout about access points, driveway width, overhead wires, preferred drop location, and any known culverts or soft areas; our minimum order is 3 tons and deliveries are typically by tri-axle dump truck. If you need tailgate spreading, request it at checkout but note drivers perform spreading at their discretion; contact our team if you have tight access or special staging needs.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.