Fill Dirt in Cape Girardeau, MO

Hello Gravel’s minimum order is 3 tons. Delivery cost in Cape Girardeau varies by distance, site access, and load size but commonly falls between $0 and $125 for local residential drops; many orders in our network qualify for free delivery. For a firm quote, enter your zip code on our site or contact our team so we can check local supplier rates and truck availability.

Fill-dirt weight varies with moisture and compaction, but a good rule of thumb is about 1.2 to 1.4 tons per cubic yard; use 1.3 tons/cu yd for quick estimates. To calculate: measure area in square feet, multiply by desired depth in feet to get cubic feet, divide by 27 to get cubic yards, then multiply by 1.3 to get estimated tons. If you prefer, use Hello Gravel’s material calculator or contact our team with your dimensions for a checked estimate.

Fill-dirt alone is not ideal as a driveway surface in Southeast Missouri because its fine particles retain water and can settle or rut during freeze-thaw cycles and heavy rain. For driveways, use fill-dirt only to raise or level grades, then install a well-compacted crushed stone or crusher run base and a proper surface layer. If you plan to raise the drive, compact fill in lifts and cap it with 4 to 6 inches of crushed material for a stable, long-lasting result.

Yes; Hello Gravel connects you with local suppliers who commonly stock contractor-grade fill-dirt in the Cape Girardeau area. Availability can vary by supplier and season, so check your zip code on our site or contact our team to confirm material type, texture, and delivery timing. Keep in mind regional sourcing means color and fines content will reflect local geology.

Typical fill-dirt is fine-grained and drains slowly, so it is not the best choice for fixing persistent low spots where drainage is the main concern. For improving drainage, use a coarse granular backfill or a mix of fill-dirt with sand and gravel, and consider installing a French drain or perforated pipe. If you want us to recommend a material for a low spot, we can help match a local supplier product to your drainage goals.

Properly placed and compacted fill-dirt used to raise grades or prepare beds generally performs well for years, but expect some settling in the first 6 to 24 months as soils consolidate. Periodic topping, regrading low spots, and maintaining vegetation or surface rock will reduce erosion; unprotected fill surfaces may need attention within 1 to 3 years depending on traffic and storms. For critical areas like building pads or driveways, protect fill with structural base materials to minimize long-term maintenance.

Fill-dirt is inexpensive and good for bulk raising, but it lacks the interlocking and drainage properties needed for a driveway surface. Crusher run or crushed limestone offers a compactable, stable base that sheds water and holds up to traffic, making them better choices for driveways in Cape Girardeau’s climate. A common approach is to use fill-dirt to build grade and then a 4-6 inch compacted layer of crusher run or crushed stone as the driveway base.

Small residential fill projects often do not require permits, but anything that affects building foundations, floodplains, or lot grading may need approval from Cape Girardeau city or county building departments. Compaction testing is commonly required for structural fills, building pads, and commercial work; for those projects a geotechnical report and testing are standard. Before you order large quantities for a construction project, check local codes and consult with your contractor or a soils engineer.

For controlled fills, place fill-dirt in 6 to 8 inch lifts (loose depth) and compact each lift well; for structural work aim for compacted densities typically specified in plans (often around 95% Standard Proctor). On slopes, bench the existing slope, use keyed lifts, and consider geotextile or erosion control matting to reduce slippage and erosion during rains. If your project is a building pad or retaining wall backfill, follow engineer specifications and consider having compaction testing performed.

Costs vary, but a typical breakdown for a small residential grade-raise might be: material cost (fill-dirt) of roughly $8 to $25 per ton depending on supplier and season, delivery $0 to $125 depending on distance and truck access, and spreading/compaction labor or equipment rental from $200 to $700 for a small job. For example, raising a 1,000 sq ft area by 6 inches requires about 18 to 20 cubic yards (roughly 24 to 26 tons) — expect a total project range of roughly $400 to $1,200 depending on local rates and whether you hire spreading/compaction services. For an accurate estimate, get a quote through our site with your address and project details.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.