Gravel, Sand & Bulk Material Delivery in Tyner, KY

Prices in rural Tyner and the surrounding West Kentucky area vary by material, quality, and supplier, but expect approximate ranges rather than exact quotes. For common bulk materials like gravel, sand, dirt, and stone, local prices often fall in a broad band depending on haul distance and load size; ask for a written quote from suppliers near ZIP 40486 for precise pricing.

Recommended depths depend on use and base preparation: 3 to 6 inches is typical for most residential driveways with proper subgrade and edging, while heavier traffic or poor soils may need deeper sections. Two inches is usually only a thin top-dressing and is not sufficient as the main structural thickness.

Choose materials based on drainage, compaction, appearance, and load requirements rather than a single product name; gravel, sand, dirt, and stone each perform differently for strength and drainage. Consider a compactable base for driveways, well-draining material for French drains, and finer material for leveling or finishing, and ask suppliers about local mixes that perform well in Tyner's climate.

Some local suppliers or haulers may add fees for long haul distances, narrow roads, steep driveways, or other access challenges common in rural areas around Tyner. These surcharges vary by supplier and by nearby ZIP code; request delivery terms and any potential access fees when you get a quote.

Drivers may be able to perform basic tailgate spreading at their discretion, but this is not guaranteed and depends on job safety and truck setup. Dedicated spreading and compaction services are usually offered for an extra fee and are priced either per hour or per yard, so ask for an itemized estimate if you need finish grading or compaction.

To convert area and depth to cubic yards, multiply square feet by depth in inches, divide by 324. For 1,000 sq ft that equals about 6.2 cubic yards at 2 inches, 9.3 cubic yards at 3 inches, 12.4 cubic yards at 4 inches, and 18.5 cubic yards at 6 inches.

A 100 ft driveway at 10 ft wide is 1,000 sq ft (see previous answer for volumes). For a 100 ft driveway at 12 ft wide (1,200 sq ft), multiply the volumes above by 1.2 to get rough cubic yard needs; always round up and account for compaction and waste.

In a smaller market like Tyner, standard delivery lead times are commonly 2+ business days, and next-day delivery may be available for orders placed before noon CST for an extra fee. Availability can fluctuate with season and supplier capacity, so schedule early for large jobs or during peak months.

Some suppliers and haulers will deliver small loads (1–5 yards), but rural markets often have minimum order sizes or small-load surcharges to cover truck and travel costs. Hello Gravel generally lists minimums and delivery options at checkout, so check availability for your ZIP code and ask about any small-load fees when requesting a quote.

Local regulations and site conditions can affect driveway thickness, setback and drainage requirements, and county or HOA rules may apply in the Tyner area, so check with local authorities before you start. Best practices include preparing a stable base, providing positive drainage away from structures, and choosing materials suited to local freeze-thaw and soil conditions.

Many suppliers offer volume discounts or lower per-yard pricing at common thresholds like 10 yards and above, with bigger savings for commercial-sized orders. Ask for tiered pricing when you request a quote so you can compare per-yard costs for the load sizes you need.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.