Fill Dirt in Mount Sterling, KY

In Mount Sterling, fill-dirt is usually one of the least expensive bulk materials. Typical delivered price ranges are about $10 to $30 per ton, which translates to roughly $13 to $40 per cubic yard depending on the soil density and moisture. Final price depends on your exact zip code, truck access, and whether delivery is included; use Hello Gravel to get an exact local quote for your address.

Hello Gravel connects you with vetted local suppliers and dump-truck haulers that sell and deliver fill-dirt in the Mount Sterling area. If you prefer to shop locally, look for landscaping supply yards, soil/aggregate pits, and excavation contractors that advertise delivery. Enter your zip code on Hello Gravel or call our team and we will show available suppliers and scheduled delivery options for your location.

Fill-dirt weight varies by composition and moisture, but a common rule of thumb is about 1.2 to 1.5 tons per cubic yard. To calculate required material, multiply area (sq ft) by depth (ft) to get cubic feet, divide by 27 to get cubic yards, then multiply by 1.2-1.5 to get tons. Example: raising 1,000 sq ft by 3 inches = 9.26 cu yd, which is roughly 11 to 14 tons of fill-dirt.

Mount Sterling experiences seasonal freeze-thaw cycles and many local soils have clay content, both of which increase the risk of heaving and settling if fill is not installed correctly. Clay holds water and swells in winter, then shrinks in dry warm months, so avoid using uncompacted clay-rich fill at finished grades. For reliable results use well-graded, compacted fills, provide positive surface drainage, and keep frost-susceptible soils away from critical foundations and driveway surfaces.

Compact fill-dirt in 4- to 6-inch lifts, control moisture so material is slightly damp but not saturated, and use a plate compactor for small areas or a vibratory roller for larger jobs. Install geotextile fabric over soft subgrades where needed and place granular material or a clean stone layer under drive surfaces to improve support and drainage. Verify compaction with a contractor or compaction testing for large or load-bearing projects.

Fill-dirt is usually cheaper per ton than crushed stone or quarry run, but it drains poorly and is less durable as a finished surface. Crushed stone or quarry run provides better drainage, load-bearing capacity, and a stable driving surface, so many homeowners use fill-dirt to raise grade and then top with crushed stone for the driveway wearing surface. For long-term driveways in Mount Sterling's climate, crushed stone over a compacted subbase is the more durable choice.

You may need permits if your project changes drainage, involves significant grading, impacts wetlands, or adds retaining walls; rules vary by project size. Check with Mount Sterling City Hall and Montgomery County planning or building departments before starting large deliveries or earthwork. For projects affecting streams, erosion, or public right-of-way, contact local authorities early to avoid delays.

If fill-dirt is used only to raise grade and then covered with a proper gravel or crushed-stone surface, a driveway can last many years with routine maintenance. Expect to regrade, add stone, and repair low spots every 1 to 3 years depending on traffic, drainage, and winter freeze-thaw cycles. If fill-dirt is left as the surface, it will rut and erode quickly and require more frequent repairs.

Use this formula: cubic yards = (area in sq ft * depth in feet) / 27. Example: for 1,000 sq ft, raising 3 inches (0.25 ft) needs about 9.26 cu yd and raising 6 inches (0.5 ft) needs about 18.5 cu yd. Multiply cubic yards by 1.2 to 1.5 to estimate tons, so 3 inches over 1,000 sq ft is roughly 11 to 14 tons and 6 inches is roughly 22 to 28 tons, depending on soil density.

Yes, many local excavation and landscaping contractors in the Mount Sterling area offer bundled services including delivery, spreading, and compaction. Hello Gravel can help you find suppliers and may connect you with local contractors for installation; you can also request tailgate spreading at checkout but drivers decide on-site whether spreading is safe. For structural or large projects, ask for a contractor who performs compaction testing and provides a written scope of work.

Give the supplier your exact delivery address, gate or driveway access details, preferred delivery date, and any overhead obstacles like low wires or trees. Specify where you want the material dumped and whether you requested tailgate spreading (understanding this is at the driver's discretion). Also note if you need a particular soil type or have disposal requirements for excess material so the supplier can prepare.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.