Fill Dirt in Huntershollow, KY

Delivered fill-dirt in West Kentucky (Huntershollow area) usually ranges depending on supplier, haul distance, and volume. Expect a broad delivered range of about $10 to $30 per ton (roughly $15 to $45 per cubic yard) for typical local deliveries, with lower per-ton pricing on larger orders and higher costs for long hauls or difficult access. Hello Gravel has a 3-ton minimum order and final price is confirmed at checkout based on local supplier rates and delivery logistics.

Hello Gravel connects customers to local quarries and truck fleets that serve the Huntershollow area; exact suppliers vary by zip code and current availability. Many local suppliers have minimum deliveries in the 3 to 10 ton range, and short local deliveries may include free or flat delivery while longer hauls can have fuel or distance surcharges. Check your zip code on the Hello Gravel site or contact our team for supplier names, confirmed minimums, and any site-access notes.

For bulk fill and raising grades in clay soils, use screened fill-dirt or structural fill to reduce large debris and organic material; however, fill-dirt itself is not usually a finished structural surface. For driveways and building pads, plan to put a well-graded granular base or road base over the fill-dirt to provide drainage and load-bearing capacity. For yard fill, screened fill-dirt is fine, but avoid using high-organic topsoil as structural fill.

Volume = area x depth: 1,000 sq ft x 0.5 ft = 500 cubic feet or about 18.5 cubic yards (500/27). Fill-dirt conversion varies by moisture and compaction, but a practical supplier rule is 1 cubic yard = about 1.2 to 1.6 tons, so you would need roughly 22 to 30 tons to raise 1,000 sq ft by 6 inches. Use Hello Gravel's material calculator or request a supplier-specific conversion for a precise quote.

Because local fill-dirt often contains fines and clay, it can retain water, heave during freeze-thaw, and settle if not compacted and drained properly. We recommend designing positive surface drainage, installing subsurface drains where needed, and using a granular working layer (road base) on top of compacted fill for driven areas. For any structure or driveway, plan for drainage and proper compaction rather than relying on fill-dirt alone.

For structural fills and building pads, local practice is often to compact fill in 4 to 8 inch lifts to 90-95% of standard Proctor density, but exact specs depend on engineering and local codes. For small yards and low areas, a plate compactor or walk-behind tamper is usually sufficient; for larger areas or deeper fills, use a vibratory roller or sheepsfoot with professional operators. Always confirm compaction requirements with your engineer or local building department before starting work.

Lifespan depends on use and finishing: if fill-dirt is properly compacted, graded, and covered with a durable surface (lawn, gravel over base, or pavement), it can remain stable for many years. Exposed fill surfaces that are poorly compacted or lack drainage may settle or erode within a few seasons, requiring regrading or spot replacement. Regular maintenance of drainage and surface coverings extends the life significantly.

Permit requirements vary by city and county and by project size; small residential deliveries usually do not need a permit, but large grading projects or fills near streams, wetlands, or steep slopes may require permits and erosion control plans. Best practice is to check with your local planning or building office before importing large volumes, and to use temporary erosion controls like silt fence or straw wattles for active grading. If you are unsure, contact Hello Gravel or your local jurisdiction for guidance.

Fill-dirt is usually the most economical choice for bulk raising of grades but is not as strong or well-draining as crushed stone or road base. Crushed stone or engineered road base provides superior load-bearing and drainage for driveways and structural pads, while clean fill (sand or gravel) can be a middle ground. A common approach is to use fill-dirt to reach grade, then cap with road base or crushed stone for the final structural layer.

Yes, many local contractors offer bundled hauling and installation that combines material delivery with spreading and compaction; availability depends on the contractor and schedule. Labor and installation rates vary widely by job size and complexity; small projects may see labor costs of roughly $30 to $80 per hour per crew member or a bundled installed price in the range of $8 to $25 per ton, while site-specific conditions can push costs higher. We recommend getting multiple local quotes and asking suppliers for recommended installers through Hello Gravel.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.