Fill Dirt in Covington, KY

Yes, fill-dirt is generally cheaper than gravel in the Covington area because it is mainly soil without crushed rock and is commonly used just to raise ground. Prices vary by supplier and moisture content, so check Hello Gravel for local quotes; we recommend comparing per-ton and per-cubic-yard prices when planning your project.

Local prices fluctuate with supply and trucking but fill-dirt in the Cincinnati/Covington region typically falls at the low end compared with engineered aggregates. For an accurate number, use Hello Gravel to get a zip-code-based quote—our marketplace reflects local suppliers and current delivery costs and requires a 3-ton minimum.

Fill-dirt is fine-grained soil used to raise or level ground; it compacts well but does not provide drainage. Gravel is crushed stone used for drainage, driveways, and structural bases. Use fill-dirt for bulk grading and gravel where strength and drainage are needed.

Contractors or homeowners sometimes give away excavated fill-dirt to avoid disposal costs, especially after foundation or utility work. Free material may contain roots, debris, or construction waste and might not be suitable for landscaping or structural fills—inspect or ask about screening before hauling it to your property.

Coverage depends on depth. As a rough guide in Covington: one ton of typical fill-dirt equals about 0.7 cubic yards and will cover roughly 200-260 square feet at 1 inch depth. For thicker fills, calculate cubic yards needed (1 cubic yard = 27 cubic feet) and convert to tons using your supplier's density if known.

You can put gravel over fill-dirt, but the fill-dirt must be properly compacted and graded first to avoid settling. For driveways or paths in Covington's clay-prone soils, compact fill in 4-6 inch lifts and consider a layer of crushed stone or road base under the gravel to improve drainage and stability.

A typical half-ton or three-quarter-ton pickup may be able to carry about 1 ton of loose fill-dirt, but weight and legal limits vary by vehicle. Hello Gravel's minimum order is 3 tons and we deliver by dump truck, which is usually safer and more efficient than trying to load heavy soil into a personal truck.

Start with compacted fill-dirt, then add geotextile fabric where weed control or separation is needed, followed by a compacted layer of road base or crushed stone before the finish gravel. This sequence helps prevent mixing, improves drainage in Covington's wetter months, and reduces future sinking.

Our local haulers typically use tri-axle dump trucks that commonly carry about 10-12 cubic yards, which translates to roughly 12-16 tons of fill-dirt depending on moisture and material density. Exact capacity varies by truck and local weight limits, so confirm load size when you get your Hello Gravel quote.

Yes, fill-dirt is appropriate for rough grading and raising low spots, but use it in thin lifts (4-6 inches), compact each lift, and finish with a layer of topsoil if you plan to grow grass. Because Covington soils can be clayey, pay extra attention to drainage and compaction to avoid future puddling or settling.

Measure the area and desired depth in feet, multiply to get cubic feet, divide by 27 to get cubic yards, then multiply by your material's tons-per-cubic-yard (ask your Hello Gravel quote for exact density). If you prefer, use our online material calculator and enter your dimensions—remember to add 5-15% for compaction and settlement.

The '70-30' guideline usually refers to mixing 70% topsoil with 30% compost for garden beds, and it does not apply to raw fill-dirt. In Covington, avoid using pure fill-dirt for planting because it often lacks organic matter; instead, cap the fill with quality topsoil or amend it before planting.

For budget-friendly grading, use locally sourced fill-dirt to raise grades where structural support or planting is not required, compact it properly, then cap with a thinner layer of topsoil or mulch. Get local quotes through Hello Gravel to compare delivery costs and consider scheduling deliveries on weekdays to avoid premium fees.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.