Fill Dirt in South Bend, IN

Typical delivered prices for fill-dirt in the South Bend area usually fall in a range because of supplier, distance, and site access differences. Expect roughly $15 to $35 per cubic yard delivered for standard clean fill-dirt; per-ton pricing varies by material density but is often used for specialty soils. Final price depends on haul distance, truck type, and whether the site needs special access or spreading services, so get a quote for an exact number.

For simple yard leveling, fill-dirt is generally the cheapest material to buy and place because it is designed to bulk up low areas. Crushed stone or gravel cost more but are better choices where drainage or a solid walking/drive surface is needed. In South Bend's freeze-thaw climate, use fill-dirt for grade work and add crushed stone for areas that need drainage or vehicle traffic.

Yes—fill-dirt is the right material for raising grade and filling low spots in a backyard, but proper compaction in layers is important to avoid future settling. Hello Gravel's platform has a minimum order of 3 tons; many local suppliers also set minimums by truckload (often a tri-axle) or by cubic yards. Contact our team early with the project address so we can match you with suppliers and confirm minimums and delivery details.

Use the formula: cubic yards = (square feet * depth in feet) / 27. For 1,000 sq ft at 3 inches (0.25 ft) you need about 9.3 cubic yards; at 6 inches (0.5 ft) it's about 18.5 cubic yards. At a typical delivered price of $15 to $35 per cubic yard in South Bend, expect roughly $140 to $325 for 3 inches and $280 to $650 for 6 inches, not including any compaction or special access fees.

A common tri-axle dump truck in the region usually carries about 10 to 12 cubic yards of loose fill-dirt per load. Delivered cost for a single truckload typically ranges from about $150 to $400 depending on distance, site access, and supplier pricing. Keep in mind Hello Gravel requires a 3-ton minimum and delivery timing (standard 2+ business days or next-day for an extra fee) affects availability and price.

Costs depend on driveway length and design, but a simple estimate uses depth targets: 4 to 6 inches of compacted fill-dirt base and 2 to 3 inches of crushed gravel top. For a 20-foot-wide by 50-foot-long driveway (about 1,000 sq ft) you would need roughly 9 to 18 cubic yards of base depending on depth, plus about 6 to 12 cubic yards of crushed gravel; delivered material costs for fill-dirt and crushed stone together will likely range from a few hundred to over a thousand dollars. Get a site-specific quote to include compaction, geotextile fabric, and truck access, which significantly affect final cost.

Some local suppliers and contractors offer stabilizers, polymer binders, or compacted aggregate mixes that produce a firmer surface than loose gravel, but availability varies by supplier in the South Bend area. These products and installation services are typically more expensive than loose aggregate and are charged by material plus labor; coverage rates vary by product and required thickness. If you are interested, Hello Gravel can help check local supplier options and refer installers, but plan for higher costs than untreated gravel.

Large-volume orders usually receive per-yard discounts, but specific tiers and rates depend on supplier capacity, quarry location, and haul logistics to South Bend. For example, per-yard delivery might be near the low end of the local range for 100+ cubic yards and lower still for 500+ or 1,000+ yards, but exact pricing needs a custom quote due to truck routing and staging. Contact Hello Gravel with the project location and timeline and we will request competitive bids from local suppliers for accurate bulk pricing.

You can put gravel over native soil for short-term use, but for a long-lasting, stable surface in South Bend's freeze-thaw conditions you should prepare the base: remove soft topsoil, add and compact appropriate fill-dirt or crushed stone in layers, and consider geotextile fabric for separation and stability. Proper compaction and a well-prepared base reduce rutting and settling over time. Suppliers on the Hello Gravel network can often recommend local contractors for installation if you need help.

A 50 lb bag of soil is roughly 1/40 to 1/50 of a cubic yard, so bags are meant for small touch-ups or potted plants and are much more expensive per cubic yard than bulk delivery. One cubic yard covers about 108 sq ft at a 3-inch depth, so bulk delivery is the cost-effective choice for areas larger than a few dozen square feet. Hello Gravel lists bulk options (cubic yard and truckload) and can check if any suppliers in South Bend offer smaller palletized bags, but expect higher per-unit pricing for bagged product.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.