Fill Dirt in New Corydon, IN

Fill-dirt is a basic soil material used to raise or level ground; it often contains native subsoil and small stone rather than topsoil. In New Corydon you’d typically use fill-dirt to build up low spots, raise grade for landscaping, or fill under slabs where good drainage or structural support is not required. It is not usually a final surface (grass or pavement) without proper compaction and, for driveways or building pads, a granular base or engineered fill is often a better choice.

Hello Gravel works with local suppliers and the minimum order is 3 tons, which is common across our network. Deliveries are typically by dump truck; the actual truckload and how much you receive depend on local supplier practices and moisture content, so check your order confirmation for exact yardage or tonnage.

Delivered prices for fill-dirt in West Indiana around New Corydon commonly fall in a range rather than a single number because cost depends on supplier, distance, and quantity. Expect a ballpark range of about $10 to $30 per ton delivered for basic fill-dirt, but check Hello Gravel with your zip code for current local pricing and any delivery fees. Prices may be lower for large orders and higher when site access is difficult or next-day delivery is requested.

Calculate volume then convert to tons: 1,000 sq ft at 6 inches is about 18.5 cubic yards, at 8 inches about 24.7 cubic yards, and at 12 inches about 37.0 cubic yards. Using a common industry estimate of about 1.3 tons per cubic yard for fill-dirt, those volumes equal roughly 24 tons (6"), 32 tons (8"), and 48 tons (12"). Always order 5-10% extra to account for settling, compaction, and measurement variance.

Fill-dirt by itself is not a durable driveway base because it can retain moisture, rut, and freeze-thaw settle. For driveways in New Corydon we recommend a crushed stone or crushed limestone base for strength, drainage, and compaction; fill-dirt can be used to level or build grade beneath that granular base. If you must use fill-dirt under a driveway, have it properly compacted in lifts and use a granular layer on top for the wearing surface.

Contractor pricing varies with site access, machine needed, and scope; typical rates for spreading and compacting fill-dirt run roughly $0.50 to $2.00 per square foot for a basic driveway prep or about $30 to $75 per hour for small equipment crews. For a 1,000 sq ft area at 6 inches, a homeowner in the New Corydon area might expect contractor costs for spreading and compaction in the range of $500 to $2,000 depending on complexity and whether machines like skid steers or plate compactors are required. Get multiple local quotes and confirm whether compaction testing is included.

For residential site fills and under slabs or driveways, aim for compaction targets commonly used in construction—about 90% to 95% of the Standard Proctor density if specified by plans or your building department. Place fill-dirt in lifts (layers) of 4 to 8 inches loose thickness and compact each lift before adding more; deeper lifts may not compact uniformly. When the fill supports structures, ask for a geotechnical recommendation and consider testing for density and moisture content.

Freeze-thaw cycles in Indiana can cause frost heave and differential movement in poorly drained, frost-susceptible soils like some fill-dirt. In the New Corydon area you should expect seasonal freezing that can disturb uncompacted or wet fill, so use well-draining materials, proper compaction, and where needed place granular material below frost-affected depths or design frost-safe footings. For critical work (foundations, septic beds, or paved surfaces) consult local frost depth data and follow building department guidance or an engineer’s recommendations.

Requirements vary by project and local jurisdiction; many areas require engineered fill or compaction testing for building pads, foundations, and septic system beds. For New Corydon projects, check with the town building department and county health department to confirm local rules; if required, a geotechnical engineer can specify acceptable fill materials, compaction targets, and testing procedures. When in doubt for structural or septic work, plan for testing and engineered fill to avoid costly repairs later.

Fill-dirt is usually the least expensive option but has poor drainage and durability for a driveway surface. Crushed limestone offers superior compaction, load-bearing capacity, and drainage and is the preferred choice for long-lasting driveways in West Indiana. Bank-run (natural mixed-size material) can be cheaper than crushed stone but is variable in quality and may not compact as well; for driveways pick a graded granular material designed for bases rather than plain fill-dirt.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.