Fill Dirt in Marion, IN

Delivered retail fill-dirt in Marion typically runs about $12 to $30 per ton, which translates roughly to $15 to $36 per cubic yard depending on moisture and compaction. Contractor or bulk pricing is often lower, commonly $8 to $18 per ton ($10 to $22 per cubic yard) for larger orders; exact pricing depends on supplier, haul distance, and order size.

Hello Gravel has a 3-ton minimum order, and standard delivery is 2+ business days. Same-day or next-day delivery may be possible from local suppliers for an extra fee if ordered early (next-day requires before noon CST); availability depends on local hauler schedules and your zip code.

Use the formula: cubic yards = (length ft x width ft x depth in) / 324. To estimate tons, multiply cubic yards by 1.2–1.4 (we use 1.25 as a practical average). For example, to raise a 50 x 30 ft area by 6 inches in Marion: 1500 x 6 / 324 ≈ 27.8 yd3, which is about 34–35 tons of fill-dirt.

Marion and much of West Indiana have clay-rich soils and seasonal freeze-thaw cycles that can cause frost heave and poor drainage. Plain fill-dirt with high clay content can settle unevenly and hold water, so for load-bearing areas you should use properly compacted, well-graded fill or add drainage and a granular layer to reduce frost-related movement.

Labor rates vary with crew size and job complexity; in Marion expect spreading and compacting labor to run about $40 to $90 per hour for a small crew. Some contractors price by area, roughly $0.50 to $2.50 per square foot for spreading and compaction, and equipment rentals (plate compactors or small rollers) often add $70 to $500 per day depending on machine.

For structural areas in Marion, choose screened, low-organic fill dirt (often called 2" minus or screened fill) with minimal roots and debris. For driveways and garage pads, use fill to build grade but finish with a compactable granular base (crushed stone or road base); pure loose clay fill is not recommended where load-bearing performance is required.

Fill-dirt can be used to raise elevation or fill low spots, but it is not a substitute for a structural base. Crushed limestone provides much better drainage and load-bearing capacity, while reclaimed asphalt (RAP) is a cost-effective, stable base option. Cost-wise, fill-dirt is usually cheapest per ton, but crushed stone or RAP will give longer-lasting, more reliable driveways in Marion’s freeze-thaw climate.

Fill used only to adjust grade should be placed in 4–6 inch lifts and mechanically compacted to at least 95% of standard Proctor density for structural fills. Driveway and garage pads normally require a compacted granular base (4–8 inches) under the pavement or slab; do not use ordinary fill-dirt as the bearing layer under footings—follow engineer or local building department guidance for structural fills and footing backfill.

Rules vary by project and parcel; Marion and Grant County may require permits for large grading, commercial projects, or if the material could affect stormwater or erosion controls. Always check with the Marion City Building Department or county planning office before importing large quantities, and ask suppliers for documentation about material source to avoid liability for contaminated fill.

Many local suppliers around Marion provide screened or clean fill-dirt and can supply basic material descriptions on request. Formal lab testing (proctor, sieve, contamination) is available for a fee from some suppliers or testing labs; warranties vary by supplier, so request material notes and testing options through your Hello Gravel order or contact local suppliers directly.

Measure carefully using the cubic yard formula and add 5–15% for settlement and compaction depending on how loose the purchase will be delivered. Note your delivery access (overhead wires, gate, driveway firmness) in the order notes, request tailgate spreading if desired (driver discretion), and ask for a material description or sample if you need screened, low-organic fill for landscaping or structural work.

Clear vegetation, mark underground utilities, and establish a clear drop area for the truck before delivery; compacted driveways may need reinforcement for heavy trucks. If you expect beyond-normal conditions (wet ground or tight access), discuss options with Hello Gravel or the supplier so the hauler can plan the safest delivery and reduce the chance of spreading or access issues.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.