Fill Dirt in Springfield, IL

Delivered fill-dirt prices in Springfield vary by supplier, source, and delivery distance. Expect a rough range of about $15 to $45 per ton or $20 to $60 per cubic yard delivered, though lower prices are possible for large orders or local dumps. Use our checkout or request a quote for an exact, location-specific price.

Most local suppliers and haulers serving Springfield deliver fill-dirt by dump truck (typically tri-axle). Tailgate spreading may be offered at checkout but is performed at the driver’s discretion and is not guaranteed; mechanical spreading or subcontracted spreading is often available for an extra fee. Always note spreading requests in your order and confirm with customer service before delivery.

For a 2-car driveway about 20 ft wide by 40 ft long, raising it 2 inches requires roughly 5 cubic yards (about 6 tons), 4 inches about 10 cubic yards (about 12 tons), and 6 inches about 15 cubic yards (about 18 tons). These are approximations—soil density and compaction matter—so use our material calculator or contact our team for a site-specific estimate. Hello Gravel’s minimum order is 3 tons, so plan accordingly.

In Springfield’s Central Illinois climate, freeze-thaw cycles and clay-rich native soils can cause settling and movement in uncompacted fill. Proper placement in thin lifts with mechanical compaction reduces settling and frost heave risk; mixing in granular material or using drainage layers helps prevent water retention in clay. Expect some initial settling in the first year and plan for compaction and final grading after settlement.

For raising grade and general backfill use a clean fill-dirt or subsoil with minimal organic material—unscreened fill works for bulk lifts but should be compacted. Do not use fill-dirt as a finished driveway surface; for driveway bases use crushed stone or road base (3/4" to 1" aggregate) on top of properly compacted fill. For landscaping, use screened fill under topsoil and reserve topsoil for the upper 4 to 8 inches where plants will grow.

If fill-dirt is used as a surface, it will require frequent maintenance—plan on regrading, adding material, and addressing ruts every 1 to 3 years depending on traffic and drainage. Fill-dirt surfaces collect water and form potholes faster in wet seasons and during spring thaw, so replacing the surface with crushed stone or paving is a longer-term solution. Regular grading and adding fresh aggregate can extend usability in the short term.

Use fill-dirt to raise elevations or fill voids, but use crushed stone or road base for structural support, load-bearing, and drainage. Crushed stone compacts and sheds water better, making it the right choice for driveway bases and French drain trenches; fill-dirt is appropriate behind retaining walls or under non-structural fills. For best results, place fill-dirt in lifts, compact it, then cap with road base or crushed stone for a durable driveway.

City rules can apply when large-volume earthwork changes drainage, impacts wetlands, or is part of a building project. Check with the City of Springfield Building Division or Public Works before ordering bulk fill-dirt—you may need grading, stormwater, or erosion-control permits for substantial fills. We recommend contacting local authorities or your contractor to confirm permit requirements before delivery.

Common extras include tailgate spreading, machine spreading with a skid-steer or bobcat, and mechanical compaction. Tailgate spreading may be free or low-cost but is not guaranteed; machine spreading and operator labor often run $75 to $150 per hour, while compaction services or contractor rates vary widely and may be quoted per job. Ask for a bundled quote that includes material, delivery, spreading, and compaction to compare costs accurately.

Measure the area (length x width) and the desired depth in feet, then use cubic yards = (length x width x depth) / 27. Convert cubic yards to tons by multiplying by an estimated factor of about 1.0 to 1.3 tons per cubic yard for fill-dirt depending on moisture and compaction. For a precise estimate, use our online material calculator or contact Hello Gravel with your measurements and local zip code.

Because Illinois soils often contain clay and experience seasonal frost, plan for compaction in lifts, good surface drainage, and a non-soil finished surface where vehicles will travel. Order a little extra to allow for settling (commonly 5% to 15% more) and check our delivery options—next-day delivery is available if ordered before noon CST. If you have site constraints or need spreading/compaction, note that at checkout and contact our team for a tailored quote.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.