Gravel in Oak Park, GA

A typical tri-axle dump truck used in our network carries about 10 to 14 tons of gravel depending on the material and local limits. Hello Gravel’s minimum order is 3 tons, so you can order smaller amounts by the ton or a full truckload depending on your project size.

Prices vary by gravel type, supplier, and delivery distance, so there is no single fixed price for Oakpark. The fastest way to get an accurate per-ton price is to enter your zip code on Hello Gravel or contact our team for a local quote based on the exact material you want.

Generally, crusher run is less expensive than decorative loose gravels because it is a blend of stone and fines and is produced for base and compaction. It also compacts well to form a stable layer, which is often the practical and budget-friendly choice for driveways in West Georgia’s climate.

Pick gravel based on function: crusher run or #3/4-inch crushed stone for base, #57 or similar crushed stone for a stable driving surface, and pea gravel or river rock for decorative uses. Consider Oakpark’s clay soils and rainy seasons—choose angular, compacting stone for driveways and add geotextile fabric or drainage if water is a concern.

Cost depends on driveway width and depth. To estimate, calculate square feet (length x width), decide on depth, convert to cubic yards then to tons (1 cubic yard ≈ 1.2–1.4 tons; 1.3 tons is a good rule of thumb), and multiply tons by local per-ton price from Hello Gravel for an accurate total.

Two inches is usually too thin for a driveway surface, especially over clay soils common in West Georgia. For long-term performance you should have a compacted base (crusher run) and a 3 to 4-inch surface layer of crushed stone or #57 on top.

Coverage varies by depth. As a rule of thumb, 1 ton of gravel will cover about 249 sq ft at 1 inch depth, 125 sq ft at 2 inches, 83 sq ft at 3 inches, and 62 sq ft at 4 inches—use these figures to estimate how much you need for your Oakpark project.

Buying in bulk delivered by dump truck is usually the most cost-effective option for most homeowners and contractors. Hello Gravel connects you with local suppliers for clear pricing and scheduled delivery, which typically lowers per-ton cost compared with multiple small pickups or contractor markups.

For a durable driveway in Oakpark, use a compacted base of crusher run (crush and run) topped with #57 or similar crushed stone for the wearing surface. Avoid loose round pea gravel for primary driveway surfaces where stability and traction are important; it’s better for decorative or low-traffic areas.

For a 20x20 (400 sq ft) area, a 4-inch top layer requires about 4.9 cubic yards and a typical 6-inch compacted base needs about 7.4 cubic yards, totaling roughly 12.3 cubic yards. Using 1.3 tons per cubic yard gives you about 16 tons total; multiply by your per-ton price and add any spreading/compaction fees for a full project cost estimate.

Crusher run drains moderately well because it contains fines that help it compact; however, on dense clay soils and in heavy rainfall areas like West Georgia you may need larger stone or engineered drainage solutions. Consider a layered system with a coarser sub-base, geotextile fabric, and proper grading to improve drainage.

You should not place gravel directly over untreated dirt if you want a long-lasting surface. Remove vegetation, grade and compact the subgrade, add geotextile fabric if needed, install a compacted base layer (like crusher run), then add and compact the surface stone—this is especially important on Oakpark’s clay soils.

#57 gravel refers to a mix of roughly 1/2- to 3/4-inch crushed stones that are angular and interlock well when compacted. It’s a common and effective top layer for driveways in Oakpark because it provides good drainage, stability, and traction when used over a proper base.

Cost depends on depth and material; for example, 1,000 sq ft at 2 inches requires about 6.2 cubic yards or roughly 8 tons, while at 3 inches it needs about 9.3 cubic yards or ~12 tons. To get a delivery and spread price for Oakpark, use Hello Gravel’s calculator or request a local quote, then multiply the tons needed by the per-ton rate and add any spreading or compaction fees.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.