Gravel in Kennesaw, GA

Typical delivered cost for bulk gravel in Kennesaw often falls between $35 and $80 per ton depending on material type, quantity, and delivery distance; a 3-ton minimum usually applies. Smaller orders, specialty rock, or next-day delivery can increase the price, while larger loads often lower the per-ton rate. Contact our team or get a quote to see exact pricing for your zip code.

Common choices in Kennesaw are 3/4" crushed stone or crushed limestone (stable and good for compaction), quarry process (crush-and-run) for a compacted base, and pea gravel for decorative walkways. Crushed stone or crush-and-run are best for driveways because they lock together and resist rutting; pea gravel is easier to move and washes more in heavy rain. Regional supply can change color and texture, so check photos or order a sample if color matters.

Hot, humid summers don't harm gravel itself, but heavy summer storms and frequent rain can wash fines away, cause rutting, and wash out sloped areas. Expect to regrade and add material more often after intense storms, and use proper base prep and drainage to reduce washout. Adding edging and installing proper slopes or catch basins will keep gravel in place during heavy rains.

For a typical 2-car driveway (about 20 x 20 ft) at 3" depth you will need roughly 4 cubic yards, which is about 5 to 6 tons depending on the material. A larger 2-car driveway at 10 to 12 ft wide by 40 ft long at 4" depth may need 8 to 10 tons. Use a material calculator and choose your depth: 2-3" for walkways, 3-4" for low-traffic driveways, and 4-6" (plus a compacted base) for higher loads.

Yes. Kennesaw’s clay soils and any slope make base preparation important: remove topsoil, install geotextile fabric if needed, add a compacted subbase (crush-and-run or compacted recycled base), then place your surface gravel. Proper compaction and edging reduce migration and washout and extend the life of the surface. On sloped or poorly draining sites you may also need drainage swales or perforated pipe.

Labor and installation for a basic gravel driveway usually range from about $1.50 to $4.00 per square foot for surface placement only, and $2.50 to $6.00 per square foot if you include excavation, subbase, compaction, edging, and drainage. Contractors may also charge by the ton, with installation labor adding $10 to $40 per ton depending on site access and grading needs. Get local quotes since slopes, clay soils, and access constraints in Kennesaw can raise costs.

Gravel is usually the lowest upfront cost and provides better drainage than asphalt or concrete, but it requires more frequent maintenance and topping up. Asphalt and concrete cost more initially, last longer with less routine upkeep, and offer a smoother surface for heavy use; grass pavers offer excellent drainage and a greener look but are more expensive to install and need ongoing care. For Kennesaw’s rainy climate and clay soils, gravel is good for drainage and cost, but expect periodic regrading and topping every few years.

In Kennesaw and West Georgia, bulk gravel is commonly sourced from local quarries, landscape supply yards, and regional aggregate suppliers. Hello Gravel connects you to local suppliers and schedules dump-truck delivery (typically tri-axle trucks) with a 3-ton minimum; standard delivery is 2+ business days and next-day may be available for orders placed before noon CST for an extra fee. Request delivery notes for driveway placement and ask about tailgate spreading—drivers may do it at their discretion.

With proper base preparation and good drainage, a gravel driveway in Kennesaw can perform well for many years but will need periodic maintenance: light regrading every 1-2 years and topping with new gravel every 2-5 years depending on traffic and storm activity. Heavier vehicle use or poor drainage accelerates settlement and washout. Regularly fixing ruts, maintaining edges, and adding fresh material after heavy storms keeps the driveway functional and attractive.

Permit and HOA rules vary: the City of Kennesaw or Cobb County may have zoning or stormwater requirements for driveway changes, and many HOAs specify surface materials and appearance. Check with your local building department and review your HOA covenants before ordering material or starting work. If in doubt, contact our sales team for guidance and to note any HOA or permit needs on your order.

Use a compacted crushed-stone base, install geotextile fabric, add edging (timber or concrete), and design positive drainage (swales or French drains) to keep water away from the surface. Consider a coarser top layer (3/4" crushed stone) and avoid using only pea gravel on slopes. For steep or highly erodible sites, consult a local contractor about retaining walls or paved aprons at high-traffic entry points.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.