Gravel in Gainesville, GA

A typical tri-axle dump truck used in Gainesville carries about 10 to 12 cubic yards, which for most gravel equals roughly 13 to 16 tons depending on material density. Price depends on gravel type and local supplier but a delivered load often falls in a wide range; contact Hello Gravel with your zip code for an exact quote and delivery estimate. Keep in mind minimum orders and delivery fees vary by supplier and distance from the local pit.

In Georgia, including the Gainesville area, gravel commonly ranges roughly $20 to $60 per ton depending on the type (stone, pea gravel, crushed rock), seasonal demand, and haul distance. Local variations are common because material is sourced regionally, so check your zip code on Hello Gravel to see precise pricing for your neighborhood. Delivery and any spreading services are extra and depend on the supplier and truck access.

Amount depends on desired depth: at 2 inches you would need about 12 to 13 tons (roughly 9 to 10 cubic yards), and at 3 inches you would need about 18 to 19 tons (around 13 to 14 cubic yards). Multiply the tons by the per-ton price from your Hello Gravel quote to estimate cost, and add delivery fees. If the ground is soft or clayey (common around Gainesville), plan for a thicker base or extra material for compaction.

The most economical options are ordering bulk materials (larger quantities lower the per-ton cost), choosing locally sourced pit-run or crushed stone, and minimizing haul distance. Picking up small amounts yourself from a nearby vendor can save delivery fees but requires a suitable vehicle and time. Use Hello Gravel to compare local supplier quotes and delivery fees so you can pick the best value for your project.

Cost varies with driveway width, depth, and material; a common example is a 100 ft long by 10 ft wide driveway at 3 inches deep needing about 18 tons of gravel. At $30 per ton that example would cost about $540 for material plus delivery, or roughly $5.40 per linear foot for material only; final prices commonly range higher once delivery and any prepping are included. Get a custom quote from Hello Gravel with your exact dimensions and access conditions.

No, 2 inches is generally too thin for a vehicle driveway in Gainesville, especially with the area's clay soils and heavy rains; it will rut and wash out quickly. For a durable driveway plan on 4 to 6 inches of compacted base (graded aggregate) and a 1 to 2 inch topcoat for finish. Proper subgrade prep and drainage are important to extend the life of a gravel driveway here.

One ton of gravel covers approximately 120 sq ft at a 2-inch depth or about 80 sq ft at a 3-inch depth, depending on the stone size and how well it compacts. These are approximate numbers—actual coverage can vary with material type and local compaction. Use Hello Gravel’s material calculator or contact our team to get an exact estimate for your project.

The most budget-friendly options typically include pit-run (bank run) gravel and crushed recycled materials like crushed concrete, since they require less processing and are often sourced locally. Prices vary by supplier and availability, so a local quote is the best way to know what’s cheapest near Gainesville. Consider that cheaper materials may require more maintenance or additional base material for heavy-use areas.

For driveways we commonly recommend an angular crushed stone base (for example 3/4" crushed stone) for strength topped with a finer mix or 'surface stone' for a smooth finish, because the angular grains lock together and compact well. Given Gainesville’s humid climate and clay subsoils, proper base depth, compaction, and good drainage are as important as stone selection. Hello Gravel can help match the right local material to your driveway needs.

Ten cubic yards will cover about 1,620 sq ft at a 2-inch depth or about 1,080 sq ft at a 3-inch depth. In tons that is roughly 13 to 14 tons depending on the material density. Use these estimates to plan delivery size and to compare material and transport costs from local suppliers.

A 20x20 area is 400 sq ft; at a 3-inch depth you would need roughly 5 tons of gravel, and at 4 inches about 6.7 tons. At a sample rate of $30 per ton material costs would be about $150 to $200, plus delivery and any site prep or compaction charges—expect variation based on stone type and local supplier fees. Get a specific quote from Hello Gravel for precise pricing and delivery availability in Gainesville.

With proper installation (adequate base, compaction, and drainage) and routine maintenance like periodic grading and adding fresh material, a gravel driveway in Gainesville can function well for many years, often 5 to 20 years between larger repairs. Heavy use, poor drainage, and local freeze-thaw or heavy rain events will shorten life and require more frequent topping. Plan on topping up a few inches every few years in high-traffic areas to maintain surface quality.

Cheaper alternatives include crushed recycled concrete and stabilized aggregate systems; both can be less expensive than new quarried stone depending on local availability. However, options like concrete or asphalt can be more costly up front but might require less frequent maintenance. Consider total lifecycle cost, drainage needs, and local soil when comparing alternatives, and ask Hello Gravel for local material options and pricing.

Yes, a DIY gravel driveway is feasible for many homeowners, but it requires planning: site grading, a geotextile if needed, proper base material and compaction, and tools or rental equipment like a plate compactor. Remember Hello Gravel’s minimum order is 3 tons and deliveries are by dump truck, so arrange delivery access and spreading plans beforehand; tailgate spreading by drivers is discretionary. If you’re unsure about prep or compaction, consider hiring a contractor for a durable result.

Hello Gravel coordinates delivery from local suppliers using contracted dump trucks; standard delivery takes 2 or more business days and next-day delivery is available for orders placed before noon CST with an extra fee. Drivers may be able to provide tailgate spreading at their discretion—request it at checkout but expect the driver to assess safety on arrival. If access is tight or you need special placement, note that in Order Notes and contact our team for guidance before delivery.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.