Fill Dirt in Tabor City, NC

Prices vary with supplier, haul distance, and moisture content, but expect screened fill dirt delivered to Tabor City to commonly range from about $12 to $35 per cubic yard (roughly $18 to $45 per ton) as a planning estimate. Local quarry rates, seasonal demand, and trucking access can shift prices, so enter your zip code on Hello Gravel or call our team for an exact, zip-specific quote. Hello Gravel has a 3-ton minimum and shows delivery timing and fees up front in checkout.

Hello Gravel connects you with local suppliers and haulers that serve Tabor City; available suppliers differ by zip code and load location. Typical minimums are 3 tons with delivery by tri-axle dump truck; delivery fees depend on distance, road access, and required permits, so check your quote in checkout or contact our team for any special access needs. We can also schedule standard (2+ business days) or next-day delivery for orders placed before noon CST with an additional fee.

Small deliveries for minor grading usually do not need county permits, but larger grading projects, new building pads, or septic work often require permits and approvals from Columbus County Planning and Zoning and the Columbus County Health Department. Before ordering, check with the county offices to confirm any erosion-control, stormwater, or septic backfill rules so you avoid delays at delivery. If you are unsure, our team can help point you to the local agencies to contact.

Volume = 1,000 ft2 x 0.5 ft = 500 cubic feet, which is about 18.5 cubic yards. Because of compaction and settlement common with local clay soils, add 10% to 20% extra, so plan for roughly 20.4 to 22.2 cubic yards. That converts to an approximate weight range of about 24 to 29 tons depending on moisture and soil density; use Hello Gravel's material calculator or contact our sales team for a site-specific estimate.

For driveways in Tabor City's clay-prone, rainy climate, a layered approach works best: a compacted crushed-stone subbase for load-bearing, then screened fill dirt only for fine grading—not as the structural layer. For erosion control, clean fill dirt can reshape slopes but combine it with proper drainage, geotextile fabric, and erosion-resistant surface (gravel, seed, or riprap) to avoid washouts. Fill dirt alone is rarely the best wearing surface for driveways or areas with heavy runoff.

Local contractors commonly use a walk-behind plate compactor for small patches and a small vibratory roller or double-drum roller for larger areas; equipment choice depends on area size and accessibility. Proper compaction typically involves compacting in 4-6 inch lifts with adequate moisture control and multiple passes until the base feels firm; for structural pads or septic beds consult an engineer or contractor for target compaction specs. If you need spreading, request tailgate spreading at checkout but know drivers decide if it is safe to perform.

Columbus County Health Department rules often require clean, uncontaminated material for septic backfill; recycled construction fill may be acceptable only if it is free of debris, organic material, and contaminants and if the county approves it. For septic systems, most local contractors and inspectors prefer clean, well-graded virgin fill or certified clean fill to avoid settlement and contamination issues. Check with the county health department before ordering recycled materials for septic work.

Tabor City sees humid summers and frequent rain, which increase the chance of settling, erosion, and slow drying of newly placed fill. To extend longevity, compact in thin lifts, install positive drainage, and avoid placing critical fills during heavy rains; expect to do minor touch-ups or top-ups after the first wet season. Good drainage and surface protection (gravel, seed, or erosion control fabric) reduce maintenance needs in the long term.

Common challenges include narrow or soft driveways that cannot support a dump truck, low-hanging wires or trees, local road weight limits in Columbus County, and HOA or neighbor restrictions. Tell Hello Gravel about access, turn radius, and obstacles in the Order Notes, and consider a designated off-load area to protect your yard; drivers will assess safety on arrival and may refuse spreading for safety reasons. If access is tight, ask us about smaller trucks or staged off-loading options when you place your order.

Clear the dump area of vehicles, debris, and obstacles, mark underground utilities and any fragile landscaping, and provide a clear access route for a tri-axle dump truck. Leave detailed delivery instructions in your order notes, check local permit needs first, and plan for some extra material to account for compaction and grading. If you want spreading, request it at checkout but expect the driver to decide based on site conditions.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.