Fill Dirt in Swan Quarter, NC

Typical delivery costs for fill dirt in Swan Quarter vary with distance, load size, and site access. Expect a base delivered price plus trucking; small-load surcharges for orders under Hello Gravel's 3-ton minimum or special truck routing commonly add $50 to $150, while difficult access or long offloads can add $50 to $200. Use Hello Gravel's checkout to see an itemized estimate for your zip code and ask about any site-specific access fees before confirming.

Availability changes with local quarries and haulers; Hello Gravel's network includes regional suppliers around West North Carolina who often can schedule deliveries within a few business days. Same-week delivery is possible when a nearby supplier has stock and trucks free, but it depends on seasonal demand and haul distance, so check availability and preferred delivery dates at checkout or contact our team for a status check.

In Swan Quarter's high water table and marsh-influenced soils, compact fill dirt in 4- to 6-inch lifts using a plate compactor for small jobs or a vibratory roller for larger areas to reduce settlement. Consider using coarse granular fill or a geotextile separator under the fill to improve drainage and limit water migration; for structural work near foundations or driveways, hire an excavator and compaction testing if required by your engineer or local building department.

Permit requirements vary by project type in Swan Quarter and Hyde County; driveways sometimes require right-of-way or road-approach permits and septic systems have strict backfill rules. Contact the Hyde County building and health departments for site-specific rules and check with your engineer before placing structural or septic backfill; Hello Gravel can supply material details to support permit applications.

Coastal marshy soils and flooding increase the risk of poor drainage, extra settlement, and salt-related corrosion; organic-rich marsh soils compress more and hold water, reducing bearing capacity. For flood-prone areas, use well-graded, low-organic fill, raise finished grades above predicted flood elevations, and include proper drainage measures to protect the fill and whatever sits on top of it.

For a driveway base, use structural fill: a well-graded, low-organic fill compacted in lifts and topped with a crushed stone base (for example 3/4" crushed stone) to provide a stable surface. For landscaping or general grade-raising, standard fill dirt (mixture of sand, silt, and clay with minimal organic matter) is fine, while utility trenches typically prefer clean sand or pea gravel around pipes for drainage and compaction consistency.

For a typical one-car driveway 10 ft wide by 20 ft long raised 6 inches, you need about 3.7 cubic yards of material. That volume usually weighs roughly 4 to 6 tons depending on moisture and compaction, so order slightly more (10%-15% extra) to account for spreading and compaction losses; use Hello Gravel's calculator for a custom estimate for your driveway dimensions.

Watch for organics (roots, peat), trash, shell fragments, and salt contamination from coastal soils—these reduce stability and can cause settlement or corrosion. Ask suppliers for a material description and request a soil test (visual sieve and organic content, and lab testing for salt or heavy metals if needed); your local extension office or a private soils lab can perform these tests and interpret results for construction use.

Properly placed and compacted fill typically achieves high relative density when compacted in lifts, but local marshy parent soils mean some additional settlement risk if native soils are soft. If compacted correctly you should expect minimal long-term settlement, but if placed over organic or saturated soils allow for several tenths to a couple of inches of settlement and monitor grades for at least a season; consider heavier compaction specs or engineered fill for load-bearing areas.

Many local contractors and haulers around Swan Quarter offer installation, grading, and compaction services with equipment like mini-excavators and compactors. Labor and equipment rates vary by scope and travel distance; expect small residential jobs to be quoted as flat rates or hourly bundles, and typical regional hourly rates for equipment-plus-operator often fall in a broad range—contact local contractors for written quotes and ask Hello Gravel to coordinate delivery timing with your installer.

Clear vegetation, remove large debris, mark underground utilities, and provide a stable truck turnaround or drop zone; difficult offload areas (soft ground, narrow gates, steep slopes) can trigger access charges or refuse the delivery. Include site notes at checkout and call Hello Gravel if you expect tight access so the hauler can plan the right truck type and minimize extra fees.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.