Fill Dirt in Sedalia, MO

Typical retail ranges for basic fill-dirt in the Sedalia/West Missouri area are roughly $8 to $25 per ton, or about $10 to $30 per cubic yard, depending on local supplier, haul distance, and whether material is screened. Prices vary with truck access, amount ordered, and seasonal demand, so get a quote for your zip code. Hello Gravel has a 3-ton minimum for orders and shows local pricing during checkout.

Hello Gravel standard delivery is 2+ business days, with next-day available if ordered before noon CST for an extra fee; regional suppliers may have similar lead times. Delivery fees depend on distance from the supplier and site access but many areas see free or low-cost delivery with minimum orders; expect a 3-ton minimum through Hello Gravel and typical tri-axle trucks carrying about 10 to 12 tons. Ask about tailgate spreading at checkout, but note drivers perform spreading at their discretion.

For West Missouri’s clay-prone soils and seasonal freeze-thaw, use low-organic, well-graded fill-dirt with a mix of fines and small granular material to reduce excessive shrink-swell. Avoid high-organic topsoil for structural fills; where drainage is a concern, include a thin granular layer (sandy or crushed stone) near the base to improve runoff. Always match the fill strategy to the project: structural fills often require engineered material and compaction testing.

Use volume = area x depth. For 1,000 sq ft: 3 inches (0.25 ft) = 250 cu ft ≈ 9.3 cubic yards, which is roughly 11 to 12 tons of fill-dirt in West Missouri (estimate uses about 1.2 tons per cubic yard). Double the depth for 6 inches (≈18.5 cu yd, ≈22 to 24 tons). Always order 5-10% extra to allow for compaction and small errors.

DIY is possible for small, shallow fills if you rent proper compaction equipment (plate compactor or small roller) and place material in 4-6 inch lifts, moistening as needed. For anything that supports structures, driveways, or deep fills, hire a contractor who can provide proper lift compaction, moisture control, and testing to meet local standards. Contractors also handle drainage, grading, and permit coordination which matters around Sedalia’s seasonal rainfall.

Fill-dirt itself is not a finished driveway surface; without a proper base course it will rut, wash, and settle during freeze-thaw and heavy rains. If properly placed and compacted as engineered fill and topped with crushed stone, the base can last many years, but expect minor surface repairs or additional topping after wet seasons. Routine maintenance usually means regrading low spots and refreshing surface stone as needed.

Fill-dirt is a low-cost, low-organic material used to build up grade and backfill; it is not intended as a final wearing surface or planting medium. Crushed stone or gravel provides structural strength and drainage for driveways and walkways; topsoil is for planting and has high organic content. Engineered fill is specified and tested for structural projects and is recommended when building under foundations or slabs in Sedalia’s variable soils.

Requirements vary by project size and location; modest yard grading usually needs no permit, but larger fills, changes to drainage, or work near property lines or waterways may trigger city or county permits. Check with Sedalia City Building and Planning or Pettis County Planning before large-scale grading; also consider stormwater and erosion controls required by local or state agencies. When in doubt, contact local officials to confirm specific thresholds and submittal requirements.

Use basic erosion controls: seed and mulch exposed slopes quickly, install silt fence or straw wattles at run-off points, and grade to slow water flow. Consider geotextile fabric or erosion control blankets on steeper banks and add drainage swales or rock-lined channels to move runoff away from foundations. These practices help with Sedalia’s spring rains and freeze-thaw cycles that can cause slope movement.

Ask suppliers for a material description (low-organic fill-dirt), maximum organic content, and evidence the material is free of debris and large roots. For structural fills request compaction specs (percent of standard or modified Proctor) and compaction testing if required; residential fills commonly target 90-95% relative compaction. If your project supports structures, request a gradation report, Proctor test, and a written compaction requirement from your engineer or contractor.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.