Fill Dirt in Lee'S Summit, MO

Delivered fill-dirt prices in the Lee'S Summit area typically range from about $10 to $30 per ton, or roughly $12 to $36 per cubic yard, depending on material quality, moisture content, and haul distance. Heavier clay-rich fill from local sources will weigh more per cubic yard and can push costs up. Get an exact price by entering your zip code on Hello Gravel or requesting a quote, since rates vary by supplier and delivery specifics.

Hello Gravel partners with local quarries, gravel pits, landscapers, and dirt farmers that serve Lee'S Summit and Jackson County; supplier availability varies by zip code. Typical minimums run from our company minimum of 3 tons up to 3–10 tons for some local operations, and delivery fees depend on distance and truck access. If you need supplier names or minimums for your address, request a quote through Hello Gravel and we will share local options and any delivery charges.

Standard delivery with Hello Gravel is generally 2+ business days, while next-day delivery is available for orders placed before noon CST for an extra fee. Most deliveries are made by tri-axle dump trucks (about 10–14 cubic yards) or smaller tandem axle trucks for tight access; smaller loads may be offered by local haulers. Drivers may offer tailgate spreading at their discretion, but it is not guaranteed; note spreading requests in Order Notes at checkout.

Use this formula: cubic yards = (area in square feet × depth in inches) ÷ 324, because one cubic yard covers 324 sq ft at 1 inch depth. To convert to tons, multiply cubic yards by 1.2–1.4 (typical local fill-dirt density; clay-rich material will be toward the higher end). For example, 1,000 sq ft at 6 inches needs about (1000×6)/324 ≈ 18.5 cubic yards, or roughly 22–26 tons depending on material density.

Minor yard grading and small fill repairs usually do not require city permits, but new driveway curb cuts, major regrading, or construction of building pads often require permits in Lee'S Summit or Jackson County. Compaction certificates are commonly required when a building permit is involved or for engineered fills under foundations and slabs. Always check with the City of Lee'S Summit Planning & Development or Jackson County before you begin, and work with a licensed engineer when required.

Lee'S Summit is in a climate with seasonal freeze-thaw and many yards have clay-rich soils that hold water and expand when wet, which can cause settling, heaving, and poor drainage. To reduce issues, use properly compacted granular fill where structural stability is needed, provide positive surface drainage, and avoid using uncompacted native clay as the final wearing surface. For critical applications near structures, consult a geotechnical or civil engineer for soil recommendations.

For structural applications in Lee'S Summit, place fill-dirt in 4–6 inch lifts and compact each lift with a plate compactor or roller to about 90–95% of Standard Proctor (engineer may specify higher). For driveways, do not rely on fill-dirt alone: finish with 4–6 inches of crushed stone or road base over the compacted fill for a stable surface. For building pads and footings, follow engineered specifications—these often call for engineered fill or import of granular material and certified compaction testing.

Fill-dirt is usually the cheapest option for raising grade but it compacts unevenly, drains poorly, and is not ideal as a structural base. Crusher run or road base provides drainage, interlock, and strength, making them better choices under driveways and slabs; topsoil is for planting and should not be used under structures. A common approach is to use fill-dirt to rough-grade, then finish structural areas with compacted road base or crusher run.

Yes—many local landscaping and site-work contractors and independent haulers in the Lee'S Summit area offer spreading and compaction services. Hello Gravel coordinates delivery with local trucking companies and can attach order notes requesting spreading, but installation and compaction services should be contracted directly with a local contractor. Ask Hello Gravel for recommended local installers or search local directories for landscapers and site contractors who provide compaction and grading.

If fill-dirt is used only as a base and covered with properly compacted crushed stone or pavement, the installation can last many years with routine maintenance like adding stone and ensuring drainage. A surface made purely of fill-dirt will settle, rut, and require frequent grading and new material, especially after freeze-thaw cycles. Regularly check drainage, regrade low spots, and top up surface material every few years to extend lifespan.

Ensure truck access by clearing parked cars, confirming gate widths, and noting any low-hanging wires or trees; tri-axle dump trucks need reasonable turning room and firm ground to avoid getting stuck in wet clay. Indicate your preferred drop location in Order Notes, but expect the driver to choose the safest spot on arrival; curbside or street dumping may require city approval. If you want spreading or delicate placement, request it at checkout and contact local contractors for professional spreading and compaction.

Go to the Hello Gravel website, enter your zip code to confirm service, select 'fill-dirt', use the material calculator to estimate how much you need, and choose a delivery date at checkout. Our minimum order is 3 tons and you can add Order Notes for spreading or special drop instructions; for questions call our sales team at 855-241-8884 or text 844-407-3734. We will connect you with local suppliers and provide an exact delivered price for your address.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.