Fill Dirt in Riverside, AL

Delivered fill-dirt prices in West Alabama typically fall in a broad range because of local geology and haul distance. Expect roughly $10 to $30 per ton delivered to properties near Riverside, AL; exact pricing depends on your zip code, order size, and truck access. Use our online quote tool or call our team for a firm delivered price for your address.

Hello Gravel works with local aggregate yards and landscaping suppliers across West Alabama rather than operating our own yards in Riverside. Minimums vary by supplier but commonly start at our platform minimum of 3 tons and often rise to 5–10 tons for specific local haulers or small-yard loads. Enter your zip code on the site to see suppliers and exact minimums available to your property.

Fill-dirt is useful for raising grade and filling depressions, but Riverside's clay-heavy soils can hold water and increase settlement risk when new fill is added. For slopes, compact fill in lifts, provide drainage (French drains, swales), and consider engineered fill or mixing with coarser material to reduce sliding and prolonged settling. Consult a local contractor for steep slopes or structural fills.

For non-structural yard fill, a clean, screened fill-dirt free of large debris is common; for structural uses (garage pads, compacted subgrade) use engineered fill compacted to at least 90–95% of standard Proctor density. For driveways and garage pads, place compacted fill-dirt only as subgrade, then add a 4–8 inch layer of road base or crusher run as the structural base before surfacing. Tell us your project type at checkout so we can suggest the right material mix.

Typical compaction targets are 90–95% of standard Proctor for structural fills under slabs and driveways. Equipment depends on the project size: a plate compactor or jumping jack for small areas, a vibratory roller for larger residential pads, and skid-steer loaders for spreading. Contractors often compact in 6–8 inch lifts and may perform field density tests for important structural work.

Cubic yards = (sq ft * depth in inches) / 324. For 500 sq ft at 4–8 inches you need about 6.2 to 12.4 cubic yards (roughly 7 to 15 tons using a conservative 1.2 tons per cubic yard). For 1,500 sq ft at 4–8 inches you need about 18.5 to 37.0 cubic yards (roughly 22 to 45 tons). Order a little extra for compaction and settling and use our calculator for an exact local estimate.

High rainfall and humid conditions in Riverside can increase settling, erosion, and vegetation growth on new fills, especially if they are not well compacted or protected. Expect some settlement in the first year; plan for erosion control (straw, seed, silt fence) and occasional top-up or regrading near drainage paths. For driveways, the structural base and surface material usually require topping or grading every 3–7 years depending on traffic and drainage.

Use fill-dirt to build or raise the subgrade and to backfill; it is not a substitute for a structural driveway base. For the driveway wearing surface and structural support, crusher run or road base are better because they compact tightly and shed water. A common approach is compacted fill-dirt subgrade, 4–8 inches of crusher run or road base, then a gravel or paved surface on top.

Local permit requirements vary by city and county, so check with Riverside city hall and your county building or planning department before importing large volumes. Permits may be needed for grading, changing drainage patterns, or disturbing more than a certain area; HOA rules can also apply. If in doubt, contact local authorities or ask our team and we can point you to typical county contacts in West Alabama.

Hello Gravel offers standard delivery in 2+ business days and next-day delivery for orders placed before noon CST for an additional fee where available. Same-day requests may be possible in some nearby towns depending on supplier and truck availability, but they typically carry rush surcharges and are subject to truck routing. Delivery surcharges can also apply for long haul distances, tight access, or special placement requests; you can view options and fees at checkout.

Confirm clear truck access, mark overhead wires or obstacles, and add delivery notes (preferred drop location) when ordering. Include an accurate street address and any gate codes; if you need spreading, request it at checkout but know drivers decide if it is safe to perform. Contact our team if you expect difficult access or need help calculating quantities and we will coordinate with local suppliers and haulers.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.