Gravel in Plainfield, IN

For most bulk landscaping uses in Plainfield, gravel is usually less expensive per ton than bagged sand, but final cost depends on the type (pea gravel, crushed limestone, or decorative stone) and delivery. Hello Gravel has a 3-ton minimum and local suppliers set prices, so request a quote to compare exact costs for your job.

You can put gravel over dirt for a temporary surface, but for a durable, low-maintenance result you should remove vegetation, grade and compact the soil, and add a compacted base layer or geotextile fabric. Plainfield’s seasonal freeze-thaw and clay pockets make proper compaction and drainage important to prevent rutting and washout.

In central Indiana, crushed limestone or crusher-run (a mix of stone and fines) is the most common and effective base for driveways because it compacts well and drains. A typical build is 4-6 inches of compacted crusher-run as a base with a 1-2 inch wearing layer of 3/4" or pea gravel on top.

A 10-yard load in the Plainfield area is roughly 14 tons (10 cu yd x ~1.4 tons/cu yd) and price can vary by material; expect an approximate delivered range of $400 to $900 depending on type, supplier, and delivery. For an exact price, request a Hello Gravel quote that factors in local material, delivery fees, and any spreading service.

Coverage depends on depth: at 2 inches you need about 6.2 cubic yards (≈8.6 tons), at 3 inches about 9.3 cubic yards (≈13.0 tons), and at 4 inches about 12.3 cubic yards (≈17.3 tons). These are estimates based on a typical crushed stone density of about 1.4 tons per cubic yard; order a bit extra for compaction and settling.

Start by removing turf and weeds, grade the area for drainage, then compact the existing subgrade. Install woven geotextile fabric if you have problem soils, add and compact a base layer of crusher-run or crushed stone, and finish with your top gravel—this helps resist mixing with Indiana’s native clay and improves longevity.

The 70/30 rule usually refers to soil/amendment mixes (about 70% soil or topsoil to 30% organic material or aggregate) to improve drainage and root health; it isn’t a strict standard for gravel mulch. For gravel beds in Plainfield you should tailor ratios to plants and drainage needs—some planting mixes use aggregates for 20-30% of the mix, while pure gravel mulches are used as a surface layer rather than a planting medium.

A 50 lb bag of pea gravel is roughly 0.018 cubic yards and will cover about 5.8 square feet at a 1-inch depth, about 2.9 square feet at 2 inches, and about 1.9 square feet at 3 inches. Coverage varies by stone size and how tightly it is placed, so buy a little extra for waste and settling.

Cost depends on length, depth, and material. For example, a 20 ft wide by 40 ft long driveway (800 sq ft) at 4 inches deep requires about 9.9 cubic yards (≈13.8 tons); at an estimated $30–$60 per ton delivered, the gravel material alone would run roughly $415 to $830, not including grading, compaction, edging, or optional spreading services—ask Hello Gravel for a site-specific quote.

Using a typical conversion (1 cubic yard ≈ 1.4 tons), one ton equals about 0.714 cubic yards. That covers roughly 231 sq ft at 1 inch depth, about 116 sq ft at 2 inches, about 77 sq ft at 3 inches, and about 58 sq ft at 4 inches.

No loose gravel truly hardens into concrete, but compacted mixes such as crusher-run (stone and fines) or gravel combined with stone dust and heavy compaction create a firm, interlocking surface that can feel almost solid. For concrete-like strength use a proper cement-treated base, pavers with a stabilizing grid, or a permeable paving system rather than loose gravel.

Hello Gravel connects you with local suppliers who deliver by dump truck (typically tri-axle) with a 3-ton minimum order; standard delivery takes 2+ business days and next-day delivery may be available for orders placed before noon CST. You can request tailgate spreading at checkout, but drivers perform spreading only at their discretion; add delivery notes for preferred drop location and access details.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.