Gravel in Kimble County, TX

Delivered gravel prices in Kimble County commonly range from about $25 to $60 per ton depending on the material (crushed limestone, crushed granite, river rock, decomposed granite), supplier distance, and whether the product is screened. Heavier, more decorative, or imported materials cost more, and delivery to remote or steep ranch locations can add fees. For an exact delivered price, check your zip code and request a Hello Gravel quote.

For Kimble County's Hill Country terrain, crushed limestone and crushed granite are the best general-purpose driveway and ranch-road materials because they compact well and resist washing under traffic. Decomposed granite works for low-traffic lanes and walkways but can rut and migrate on slopes after heavy rains. River rock and rounded stone are visually appealing but tend to shift and are poor choices for primary driving surfaces.

A 12 ft by 40 ft driveway at 3 inches deep has a volume of about 4.44 cubic yards (480 sq ft x 0.25 ft = 120 cu ft ÷ 27). Using a common conversion of about 1.4 tons per cubic yard, you would need roughly 6.2 tons. Order 10-15% extra to allow for compaction and grading, so plan to buy about 7 tons; Hello Gravel has a 3-ton minimum order.

Hello Gravel connects you with local suppliers and contracted dump truck haulers that deliver to rural Kimble County addresses. You can request tailgate spreading at checkout, but spreading is performed at the driver’s discretion and is not guaranteed. To improve the chance of successful delivery and spreading, include gate codes, access notes, and preferred drop locations in your order.

Kimble County's Hill Country gets occasional high-intensity storms and has steep, rocky slopes that increase runoff and washouts. Expect more frequent regrading and spot repairs after storm seasons, and design drainage features (ditches, culverts, crowned sections) to divert water away from gravel surfaces. Regular inspections after heavy rains and annual maintenance help prevent erosion from becoming a larger repair.

In most rural parts of Kimble County there are no blanket bans on gravel types for private driveways, but specific work that alters road access, crosses public rights-of-way, or affects drainage may require county permits or coordination with TxDOT for state roads. Homeowners with an HOA or property in a subdivision should check local covenants. When in doubt, contact Kimble County offices or your local permitting authority before installation.

Screened gravel typically costs more—often $2 to $6 more per ton—because the screening process removes oversized pieces and makes the aggregate more consistent. Screened material compacts more uniformly and gives a cleaner finished look, while unscreened mixes are cheaper but contain more fines and varied sizes that can affect compaction and dust. Consider screened gravel for driveways and visible landscaping and unscreened for base or fill where aesthetics matter less.

Crushed limestone is generally the lower-maintenance choice in Kimble County because it compacts, resists erosion, and provides good drainage while maintaining a stable surface. Decomposed granite gives a fine, natural look but can wash away on steeper slopes and needs more periodic replenishing. Choose crushed limestone where durability and low upkeep matter, and use decomposed granite for low-slope decorative areas.

A properly built gravel driveway in Kimble County will often need surface regrading annually or after major storm events and typically requires adding new material every 3 to 7 years depending on traffic, slope, and drainage. Heavy-use ranch roads or steep sections may need replenishment more often. Good drainage and routine maintenance extend the time between material top-ups.

DIY is feasible for short driveways or small patches and saves labor costs if you have equipment and experience, but it requires time, effort, and tools to get drainage and compaction right. Hiring a contractor brings grading equipment, compaction tools, and experience with Kimble County drainage issues—this reduces mistakes but adds labor and equipment costs, which can range from a few hundred to several thousand dollars depending on project size and access. Get multiple quotes and compare scope, warranties, and references before deciding.

Include your full address and zip code, preferred delivery date, exact drop location, gate codes or access instructions, driveway or easement restrictions, and a contact phone number. Mention if you need tailgate spreading and any low-clearance or weight-restricted access so dispatch can match the right truck. If your site is steep or has drainage concerns, note that so the supplier and driver can advise on best placement.