Gravel in Wichita Falls, TX

Costs vary by supplier, distance, and load size, but typical local delivery fees in Wichita Falls range from $0 to $150 for a standard tri-axle load; many orders over minimum receive free or reduced delivery. Tailgate spreading is usually an extra service and commonly costs about $50 to $250 per job (or roughly $10 to $25 per ton), depending on access and how much spreading is required. Always get a firm quote at checkout and request spreading there; drivers perform spreading at their discretion on delivery day.

Crushed limestone (¾u0022 to 1u0022) and crushed stone aggregates are the most common choices in North/West Texas because they compact well and shed water during heavy rains. Crushed concrete is a cost-effective, durable option for the base, while pea gravel and river rock tend to shift and are not recommended for vehicle traffic. Decomposed granite works for low-traffic paths but can rut in heavy summer storms without proper base and drainage.

For a typical 2-car driveway of about 20' x 40', you need roughly 7.5 cubic yards at 3u0022 depth and about 10 cubic yards at 4u0022 depth. That equals about 10 to 14 tons for 3u0022 and about 14 to 18 tons for 4u0022, after accounting for 10-15% compaction and settling. Use your exact dimensions and add 10-15% to cover compaction and spreading loss.

Yes, many local suppliers and haulers offer tiered pricing for larger orders and contractor accounts; discounts commonly start on orders above about 10 to 20 tons. Hello Gravel’s platform can connect you to suppliers that provide contractor pricing and repeat-customer rates, so request a quote through checkout or contact our sales team for volume pricing. Keep in mind minimum orders are typically 3 tons for standard deliveries.

Hot, dry summers have little direct effect on gravel, but they can encourage dust and minor movement of fines; occasional heavy rains are the bigger concern because washouts and rutting can occur without good drainage. Regular chores include regrading low spots after storms, adding a few inches of fresh material every 2-5 years depending on traffic, and keeping edges and drainage ditches clear. Proper slope, edging, and cross drains reduce the need for frequent repairs.

Some neighborhoods and HOAs in Wichita Falls may have restrictions on driveway surfaces, front-yard materials, or visible landscaping choices, and the city has zoning and stormwater rules that could apply. Before ordering material, check your HOA covenants and contact Wichita Falls city permitting or planning if you are unsure about street access, curb cut requirements, or drainage standards. When in doubt, get written approval from your HOA or a quick code check from the city to avoid rework.

Crushed concrete (recycled concrete) is often more cost-effective locally and compacts very well as a base layer, making it a durable choice for parking areas and driveways. Crushed limestone or crushed stone makes a better finished surface because it resists dust and provides a cleaner appearance. A common approach in Wichita Falls is crushed concrete or crush-and-run for the base and a limestone topcoat for the driving surface.

For RV pads, contractors typically recommend a compacted base of 4 to 6 inches of crush-and-run or recycled concrete, topped with 2 to 3 inches of ¾u0022 crushed stone for the surface. For drainage features and French drains, larger stone (1u0022 to 2u0022) or clean washed rock is used to encourage flow, with geotextile fabric beneath to prevent fines from clogging the stone. Proper slope and compaction are essential in Wichita Falls to handle occasional heavy downpours.

Many contractors in the Wichita Falls area recommend geotextile fabric and some form of edging for long-term stability; some include these in full-install quotes while others price them as add-ons. Fabric and basic plastic or metal edging typically add moderate cost—expect roughly $0.50 to $3.00 per square foot depending on materials and installation complexity, which can mean $200 to $1,000+ on typical driveways. Including fabric and edging up front usually reduces future maintenance and material replacement costs.

Suppliers that serve Wichita Falls generally source materials from regional quarries and pits within roughly 30 to 75 miles, which keeps material types typical to North/West Texas (limestone and recycled aggregates). Delivery radius and fees depend on the supplier and truck availability; tri-axle dump trucks commonly deliver 8 to 12 tons per load and most suppliers have minimum orders of about 3 tons. Check your zip code on the Hello Gravel site to see local supplier options and exact delivery fees.