Stone in Washington, WI

Retail and delivery prices for crushed stone in Washington, WI vary by type and season, but a practical range is about $25 to $60 per ton delivered for common driveway grades. One cubic yard of crushed stone in this region equals roughly 1.3 to 1.5 tons, so expect about $35 to $90 per cubic yard delivered depending on size, supplier, and distance. For an exact, up-to-date price and any delivery minimums, check your zip code on Hello Gravel and get a local quote.

For Washington-area residential driveways, contractors commonly use a compactable base (1-1/4u0022 minus or 'Class 5' base) topped with 3/4u0022 crushed stone or 3/8u0022 fines for a smoother finish. Farm roads and heavy-use rural approaches typically use larger base stone (1-1/2u0022 to 2u0022) for the subbase, often capped with 3/4u0022 stone for wear; heavier traffic may need deeper base layers. Local suppliers use regional mixes, so ask your Hello Gravel quote which exact size is sourced locally.

Crushed stone drains much better than sand or fines, which helps limit frost heave and potholing in West Wisconsin winters, but poor base prep or trapped water will still cause movement. Use a well-compacted granular base, provide slope and drainage, and avoid excessive fines in the wearing layer to reduce freeze–thaw damage. Expect to do spring grading and spot repairs after severe winters, which is normal for loose stone surfaces in this climate.

Hello Gravel partners with local suppliers and haulers across West Wisconsin; availability and exact suppliers depend on your ZIP code. Common minimums for delivered truckloads are our platform minimum of 3 tons, though some quarries or direct bulk accounts may have higher minimums (10+ yards) or different fees for long hauls. Delivery fees vary by distance and truck type; the quickest way to see suppliers, minimums, and fees for Washington is to enter your ZIP code on Hello Gravel for live quotes.

Contractors in the Washington area emphasize good subgrade prep: remove organic material, grade to positive drainage, and install geotextile if soft spots exist. Build a compacted base (commonly 6u0022 to 8u0022 for residential driveways, deeper for heavier loads), compact in lifts, then place a 2u0022 to 3u0022 wearing course of 3/4u0022 or 3/8u0022 stone and compact. Add crown for runoff, use edge restraints where possible, and check drainage to keep water off the surface.

Approximate quantities for typical crushed stone (using 1.4 tons per cubic yard): 2u0022 depth needs about 8.6 tons per 1,000 sq ft, 3u0022 needs about 13.0 tons, and 4u0022 needs about 17.3 tons. These are estimates; actual needs depend on stone density and compaction, so order a little extra (5% to 10%) to allow for settlement and grading. Use Hello Gravel's material calculator or request help from our team for a precise amount based on local stone.

Loose crushed-stone driveways have lower initial material and installation cost than asphalt but generally higher ongoing maintenance: expect periodic grading, adding 1 to 3 tons every few years, and spot repairs after freeze–thaw events. Crushed limestone that compacts well can require less frequent topping but may still need winter patching; asphalt has higher upfront cost and a longer service life with sealing every few years. For Washington-area winters, factor in more frequent maintenance for loose surfaces and consider long-term trade-offs when choosing a surfacing type.

Rules vary by municipality and HOA; some local ordinances or neighborhood covenants may specify driveway materials, dust control, edge treatments, or setback requirements. Before installing loose stone in Washington, check with your city/town zoning office and your HOA (if applicable) to confirm permitted materials and any required permits or standards. If you need documentation for permitting, Hello Gravel can provide delivery details and material descriptions to support your application.