Stone in Dallas, WI

In West Wisconsin around Dallas, crushed stone retail typically runs about $20 to $40 per ton for pickup. With delivery to a rural address in Dallas, WI, total delivered prices commonly land in the $40 to $90 per ton range depending on stone type, distance, and truck minimums. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days or next-day delivery (orders before noon CST) for an extra fee.

Local suppliers near Dallas most commonly offer crushed limestone, crushed dolomite, #57 crushed stone, #2 crushed stone (larger base rock), and screened bank-run or pit-run stone. Availability reflects regional quarries, so color and angularity vary; Hello Gravel can show the nearby supplier options for your zip code when you order.

Freeze-thaw cycles in West Wisconsin can cause frost heave and rutting if the base or drainage is poor. Using a well-compacted, free-draining stone base, installing proper slope and drainage, and keeping a top wearing layer of angular crushed stone will reduce freeze-thaw damage and make maintenance easier.

For a typical driveway surface with a 6u0022 compacted stone depth, expect about 5 to 8 tons for a 1-car driveway (roughly 10 ft x 20 ft) and about 10 to 16 tons for a 2-car driveway (roughly 20 ft x 20 ft). If you want a thicker base (8u0022 or more) or a longer rural driveway, increase those estimates by 25% to 50%; Hello Gravel’s calculator can convert your exact dimensions to tons.

Permit requirements vary by township and HOA around Dallas, WI; many rural townships do not require a permit for private driveways, but municipal rules and HOA covenants can have regulations for setbacks, curb cuts, or driveway surfacing. Check with Dallas town or county zoning, and review any HOA guidelines before starting work to avoid rework.

For driveways use a layered approach: larger crushed stone (#2 or 1-1/2u0022 to 3u0022) for the base and 3/4u0022 to #57 crushed stone for the top wearing surface. For drainage trenches use clean 3/4u0022 to 1-1/2u0022 stone around drain tile. For garden paths choose finer crushed stone such as 3/8u0022 or screened 1/4u0022 stone or compactable #57 depending on desired firmness and appearance.

Labor and installation for a standard gravel driveway in the Dallas area commonly range from about $800 to $2,500 for a single-car driveway and $1,500 to $5,000 for a two-car driveway, depending on grading, excavation, base material, compaction, and access. Site factors such as clay subgrade, length, drive entry work, and hauling distance can move costs above or below these ranges.

Hello Gravel connects you to nearby quarries and aggregate suppliers that deliver to Dallas; common local materials suppliers include regional stone yards and pit operators in west Wisconsin. Most suppliers respect a 3-ton minimum for delivery through Hello Gravel, and delivery zone limits or extra fees may apply for long drives or remote locations; check your zip code on our site or contact our team for specific supplier options.

Crushed stone is less expensive upfront than asphalt or concrete, provides better drainage, and is easier to repair, but it requires periodic grading and topping and typically has shorter lifespan without maintenance. Asphalt and concrete have higher initial costs and lower routine maintenance but can crack with freeze-thaw and may require more expensive repairs in Dallas’ climate; choice depends on budget, desired maintenance level, and appearance.

Over clay subgrades, remove soft organic topsoil, install geotextile fabric, place and compact a 4u0022 to 6u0022 or thicker base layer of larger crushed stone (#2 or similar) that promotes drainage, then add a 3u0022 to 4u0022 wearing course of #57 or 3/4u0022 crushed stone and compact. Provide positive slope for surface drainage, install edge restraints where possible, and consider underdrains or additional depth if the site is consistently wet or prone to frost heave.