Gravel in Goshen, VA

In the Goshen area, expect to pay roughly $30 to $70 per ton for common gravel types delivered, depending on material (washed, crushed, river gravel), local quarry availability, and delivery distance. Remote mountain roads and seasonal demand can push prices toward the higher end, so check our checkout quote for an exact delivered price.

One ton of gravel is roughly 20 cubic feet, which covers about 120 sq ft at 2 inches depth, about 80 sq ft at 3 inches, and about 60 sq ft at 4 inches. Use these estimates to calculate quantities for driveways, pathways, or beds, and verify with our material calculator for your exact gravel type.

Natural river-run gravel is often slightly cheaper than manufactured crushed stone, but prices vary by local supply. Crushed stone usually offers better compaction and drainage for driveways and heavy-use areas, so weigh cost against performance when choosing.

Most tri-axle dump trucks used for Hello Gravel deliveries carry about 10 to 12 cubic yards, which is roughly 13 to 16 tons depending on material density. If you need more or less, we can schedule multiple trucks or suggest smaller loads—remember our minimum order is 3 tons.

A 10-yard (about 13-15 ton) truckload will cover roughly 1,560 sq ft at 2 inches depth (10 yards = 270 cubic feet; at 2u0022 depth = 1,620 sq ft), but coverage depends on depth you plan to place. For a typical 12 ft wide driveway, a 10-yard load gives about 130 to 160 linear feet at 3u0022 depth; use our calculator or tell us your driveway dimensions for a precise recommendation.

Two inches is usually too thin for a permanent driveway in Goshen, where freeze-thaw and heavier vehicles are common. We recommend 3 to 4 inches minimum over a compacted base for passenger vehicles, and 4 to 6 inches for regular heavy truck traffic or weak soils.

With proper installation (good subgrade prep, drainage, and periodic regrading/top-up), a gravel driveway in Goshen can last 10 to 25 years before significant rehabilitation is needed. Local freeze-thaw cycles and road usage will affect lifespan, so plan periodic maintenance like adding fresh gravel and regrading.

Costs depend on driveway width, depth, and gravel type; for a 200 ft long, 12 ft wide driveway at 3 inches depth you would need about 25 tons of material. Multiply the tonnage by your per-ton delivered price from our checkout for a material-only estimate, then add any spreading or base work costs for a full installed price.

Finely crushed stone or 'crusher fines' and decomposed granite can compact into a very firm surface when properly installed and compacted. For a truly hardened surface you can also use stabilized gravel mixes (polymer or cement-bound) available from some suppliers; ask us for product options and whether the driver can assist with tailgate spreading.

Gravel for Goshen projects typically comes from nearby quarries and river deposits in western Virginia and the Shenandoah Valley region, reflecting local geology. Because Hello Gravel uses regional suppliers, color and texture may vary with local stone types—add color notes at checkout if you have a preference.

Common loads are measured in tons or cubic yards; 1 cubic yard of gravel is about 1.3 to 1.5 tons depending on the material. A 10-yard truck is roughly 13 to 15 tons; larger orders often lower the per-ton delivered cost, so check our website for transparent pricing and volume discounts.

Confirm access, turning radius, and any low-hanging wires or steep grades on your property—mountain roads around Goshen can limit truck access. Choose a delivery date that avoids freeze conditions if possible, request tailgate spreading at checkout (driver discretion), and contact our team if you need help calculating quantities.