Gravel in Glen Allen, VA

Delivered prices vary by material and supplier, but expect roughly $30 to $60 per ton for common driveway gravel in the Glen Allen/Richmond area. Final price depends on material type, delivery distance, seasonal demand, and minimum order (Hello Gravel minimum is 3 tons). Use our zip code lookup or request a quote for an exact delivered price.

A 1 ton estimate is about 116 sq ft at 2u0022 depth, about 77 sq ft at 3u0022, and about 58 sq ft at 4u0022. These are approximate values using a typical gravel density; for large projects use a calculator or send dimensions to our team for a precise quantity. Coverage can vary slightly by gravel type and moisture content.

For a 200 ft driveway 10 ft wide (2,000 sq ft) with a recommended 4u0022 compacted crusher-run base plus 2u0022 top gravel, plan about 35 tons for the base and 17 tons for the top, roughly 52 tons total. For a 12 ft width (2,400 sq ft) the same build is about 41 tons base + 21 tons top, roughly 62 tons total. These are practical estimates; exact amounts depend on existing subgrade, compaction, and material choice.

A 10-yard load (about 10 cubic yards) typically weighs roughly 14 tons and will cost approximately $420 to $840 delivered in the Glen Allen/Richmond area based on a $30 to $60 per ton range. Price varies with material type (pea gravel, crushed stone, screenings), supplier, and delivery distance. Get an exact delivered price by entering your zip code on our site or requesting a quote.

A 10-yard load covers about 1,620 sq ft at 2u0022 depth, about 1,080 sq ft at 3u0022 depth, and about 810 sq ft at 4u0022 depth. Those numbers assume full cubic-yard coverage (1 yd3 = 27 cu ft). Use these figures to estimate how many truckloads you need for your driveway.

For driveways in Glen Allen, crushed stone or crusher-run is usually more cost-effective in the long run because angular particles lock together and compact, reducing rutting and washout compared with rounded 'river' gravel. Crushed stone may cost a little more up front but requires less frequent top-up and grading. Use decorative round gravel only for low-traffic areas and rely on crushed stone for driveways and vehicle areas.

Yes, removing topsoil and installing a compacted base (typically 4u0022 to 6u0022 of crusher-run) is recommended for driveways, especially on Glen Allen's clay soils and in freeze-thaw conditions. Geotextile fabric is optional but helpful for separating subgrade and aggregate and reducing weed growth and mixing of fines. Proper drainage and compaction up front save time and money on maintenance later.

No, 2 inches is generally not sufficient for a long-lasting driveway. For durable performance we recommend a compacted base of 4u0022 to 6u0022 crusher-run plus a 2u0022 to 3u0022 top layer of driving surface gravel, for a total compacted thickness of about 6u0022 to 8u0022. Thicker sections are recommended where heavy vehicles or poor subgrade exist.

Products that yield a firmer surface include crusher-run (crusher fines), limestone screenings, and engineered 'gravel stabilizer' grids or resin-bound systems. Polymeric binders and resin-bound gravel create a hardened, low-dust surface but are specialty products and may cost more and require contractor installation. Availability varies by supplier in the Richmond area, so contact Hello Gravel for local options and pricing.

A well-built gravel driveway in Glen Allen can perform well for many years with regular maintenance: regrade and fill potholes each year, add 1u0022 to 2u0022 of top dressing every 1 to 3 years depending on traffic, and plan for a more extensive resurfacing (adding several inches or redoing base) every 5 to 10 years. Local freeze-thaw cycles and heavy rainfall increase maintenance frequency, so seasonal checks after winter and heavy storms are recommended.

Most homeowners top up driveway gravel every 1 to 3 years with 1u0022 to 2u0022 of new material depending on traffic and drainage. High-traffic driveways or those without a proper base may need topping more often. Ordering smaller deliveries as needed is easy through our site, and our material calculator can help plan quantities.

Use our online material calculator to enter your driveway dimensions and desired depth; it will show ton and yard estimates and recommend layers for base and top. Minimum orders start at 3 tons; choose your delivery date at checkout and add order notes (color preference, access details). If you prefer help, contact our team with your address and project details for a custom recommendation and quote.